Woodworking & Architectural » News and Press Releases

Designed to accommodate applications where a bolt installation is the preferred method, this addition provides for a single-tool installation, which simplifies and speeds mounting, reducing labor time by up to 50%.

The new square carriage bolt holes accommodate #10 carriage bolt or M-6 fasteners. Holes are located adjacent to existing mounting holes.

Accuride International is a global company providing expertise in the development of movement solutions for an extensive range of industries. All products are RoHS compliant and manufactured according to a quality management system registered to ISO 9001:2008. For product specifications and distributor locations, visit the company’s web site at www.accuride.com.

Starting out on the west coast, races have been scheduled at E.B. Bradley Company locations in San Diego, Anaheim, and Hayward, California; Portland, Oregon; and Kent, Washington. Additional events will be announced as scheduled. Racers are encouraged to register right away to reserve a space in the competitions. For more information or to register for an event, visit http://www.accuride.com/BSRA/.

Competitors will vie for awards on a 75-foot wooden track complete with Christmas-tree starting signals. The sawdust—and occasionally the sanders—really flies on this track, as racers aggressively compete for the fastest times. First, second, and third place awards are presented, as well as a special Judge’s Award.

Top racers from events around the country will compete in the BSRA National Championships, which will be held during the AWFS®Fair, in Las Vegas, Nevada on July 21, 2011.

Accuride International is leader in the design and manufacture of precision slide products for a variety of applications. For more information, visit www.accuride.com.

The slides are full extension and carry loads up to 350 pounds. They may be flat mounted at a lesser load capacity of up to 150 pounds per pair. Model 7950 does not offer a disconnect method; model 7957 has a handed lever disconnect. These products have an enhanced ball retainer design, which mitigates retainer migration. Both models are available in lengths of 12" to 36" in a clear zinc finish.

Accuride International designs and manufactures RoHS-compliant precision slide products for a variety of applications in cabinetry and casework. The company has six locations worldwide with all manufacturing adhering to quality management systems registered to ISO 9001:2008. For more information, visit www.accuride.com.

# # #

Starting out on the west coast, summer races have been scheduled at E.B. Bradley Company locations in Anaheim, San Diego, and Hayward, California; Portland, Oregon; and Kent, Washington. Racers are encouraged to register right away to reserve a space in the competitions. For more information or to register for an event, visit http://www.accuride.com/BSRA/.

Competitors will vie for awards on a 75-foot wooden track complete with Christmas-tree starting signals. The sawdust is known to fly at these events and racers aggressively compete to take home a trophy for the fastest times on the track. First, second, and third place awards will be presented, as well as a special Judge’s Award. Additional circuit races will be announced as scheduled.

Accuride International is leader in the design and manufacture of precision slide products for a variety of applications. For more information, visit www.accuride.com.

Suggested applications include kitchen islands, dining or entertainment bars, or other cabinetry that benefits from two-sided access.

Offering a 100-pound load rating, Model 0363 has a detent that keeps the drawer in place at the center point of the slide travel. The slide fully extends in both directions from the center detent to give complete access to drawer contents. There is no disconnect, which ensures drawers are not unintentionally removed. This product has been tested to 80,000 cycles and is available in zinc in lengths of 16", 20", 24", and 28". It is RoHS compliant.

Accuride International manufactures precision ball bearing slides for a variety of applications and has six locations worldwide; each governed by a quality management system registered to ISO 9001:2000. For more information on products and distributor locations, visit the company’s web site at www.accuride.com.

The Ascent conceals and secures screens when not in use, keeping surfaces free of clutter. To access screens, users press lightly on the top of the lift support column, which activates it to rise in less than 2 seconds.

The Ascent Lift does not require power. The smooth movement is controlled through weights, which are added to counterbalance the screen. The main support column swivels left and right 112.5º to expand viewing angles and the hole pattern provides a wide range of bracket and screen mounting options.

The Ascent Lift is quick and easy to install; the unit is simply aligned to the center of the cabinet and 8 fasteners are installed. Standard packaging includes a cable management kit and a set of weights. Additional weight packs may be purchased to accommodate lighter screens as well as optional fixed or tilt VESA brackets for kits for attaching screens or other components to the unit.

The slim and compact design makes the Ascent a multi-purpose solution for a wide range of environments such as retail stores or customer service counters and kiosks, classrooms, hospitals, business or medical offices, or conference rooms. In residential applications, the lift is a convenience and space saver throughout the home. Other uses may be found in motor homes, trailers, and mobile office trailers.

Accuride International manufactures precision ball bearing slides for a variety of applications and has six locations worldwide; each governed by a quality management system registered to ISO 9001:2000. For more information on products and distributor locations, visit the company’s web site at www.accuride.com.