Woodworking 2018-04-18T15:54:57+00:00

BUILT-IN BENEFITS

MADE TO THE HIGHEST STANDARD

Accuride products run through 50,000 cycles of rigorous testing. Need more assurance? We back all our products with a Limited Lifetime Warranty.

You can see in the chart below how Accuride movement solutions exceed HD200 load ratings and AWI drawer width standards.

Logo Images

Just look at Specification Suggestions below and:

  • Choose your category section that best fits your project.
    1. Example: Section 06 41 00 –> ARCHITECTURAL CASEWORK
  • Use your cursor to select and copy the specs that fit your project.
    1. Example: Heavy-Duty Drawers
  • Paste those specs onto your project document.

That simple.

1.3.1 SPECIFICATION SUGGESTIONS

Solutions for Any Challenge

SECTION 06 41 00 – ARCHITECTURAL WOOD CASEWORK

  1. Drawers 24 in. [610 mm] wide or less: Accuride 7434 (7432, full extension) all ball bearing slide, with rail mount, full extension + 1 in. [25 mm] over travel, hold-in detent, 100 lbs./pr. [45 kg] load rating, and progressive movement.
    1. Standard finish: clear zinc
    2. Optional finish: black zinc
  2. Drawers 30 in. [762 mm] wide or less: Accuride 3135EC, fully concealed undermount slide with ball bearing and polymer rollers, with lever disconnect, full extension, and 100 lbs./pr. [45 kg] load rating.
    1. Standard finish: clear zinc
  3. Drawers from 31 in. [787 mm] up to 60 in. [1524 mm] wide: Accuride 3160EC Eclipse, fully concealed undermount slide, with a Cable System (included) and Wide Drawer Stabilizer Kit, lever disconnect, full extension, soft-close action, and 100 lbs. [45 kg] load rating.
    1. Standard finish: clear zinc
  1. Drawers 42 in. [1067 mm] wide or less: Accuride 3640A all ball bearing slide, with drawer rail/bracket mount, full extension + 1 in. [25 mm] over travel, hold-in detent, and 200 lbs./pr. [91 kg] load rating.
    1. Standard finish: clear zinc
    2. Optional finish: black zinc
  2. Drawers 42 in. [1067 mm] wide or less: Accuride 7957 (7950, non-disconnect) all ball bearing slide, with full extension, handed lever disconnect, and 350 lbs./pr. [159 kg] load rating.
    1. Standard finish: clear zinc
  1. Light-Duty Lift: Accuride Ascent CBLift-0019 push to open and close mechanical lift for small screens from 5.5 to 14.5 lbs. [2.5–6.6 kg], up to 17.5 in. [450 mm] tall, and 22 in. [558.8 mm] diagonally; swivels +/- 112.5o.Optional brackets required to mount screen to lift.
    1. Standard finish: black zinc
  2. Flat Panel Lift: Accuride Quick Lift CBLift-050 remote-controlled lifts standard cabinetry 34 in. [864 mm] tall. Accommodates most panel screens up to 50 in. [1270 mm] diagonally, 33.5 in. [851 mm] tall, and up to 120 lbs. [54 kg] in weight.
    1. Standard finish: black zinc
  3. TV Pull-out w/Swivel: Accuride CB3620-258TV with all ball bearing slides, 360o swivel assembly, 14-inch [356 mm] extension, and load rating up to 225 lbs. [102 kg]. Holds televisions up to 36 in. [914 mm] diagonally.
    1. Standard finish: black zinc
  1. Vertical cabinet doors up to 30 lbs. [14 kg] and 42 in. [1067 mm] tall that retract into the cabinet: Accuride 1321 Pro Pocket all ball bearing, full overlay Flipper Door Slides® with auto-open feature.
    1. Standard finish: black zinc

SECTION 12 35 00 – SPECIALTY CASEWORK

  1. Drawers 16 in. [406 mm] wide or less: Accuride 3832E all ball bearing slide, with lever disconnect, hold-in detent, full extension, and 100 lbs./pr. [45 kg] load rating.
    1. Standard finish: clear zinc
    2. Optional finishes: black zinc, electrocoat white
    3. Optional features: self-closing, touch release, heavy-duty self-closing, weather resistant, detent out, and easy-close
  2. Drawers 30 in. [762 mm] wide or less: Accuride 3135EC Eclipse, fully concealed undermount slide with ball bearing and polymer rollers, with lever disconnect, full extension, and 100 lbs./pr. [45 kg] load rating
    1. Standard finish: clear zinc
  3. Drawers from 31 in. [787 mm] up to 60 in. [1524 mm] wide: Accuride 3160EC Eclipse, fully concealed undermount slide, with a Cable System (included) and Wide Drawer Stabilizer Kit, lever disconnect, full extension, soft-close action,
and 100 lbs./pr [45 kg] load rating.
    1. Standard finish: clear zinc
  4. Drawers 24 in. [610 mm] wide or less, drawer width of a standard 3-foot case section: Accuride 7434 (7432, full extension) all ball bearing slide, with rail mount, full extension + 1 in. [25 mm] over travel, hold-in detent, 100 lbs./pr. [45 kg] load rating, and progressive movement.
    1. Standard finish: clear zinc
    2. Optional finish: black zinc
  1. Drawers 42 in. [1067 mm] wide or less: Accuride 3634EC soft close (3634 standard 200 lbs/pr) all ball bearing slide, 1 in. over travel, 150 lbs./pr. [68 kg] load rating.
    1. Standard finish: clear zinc
    2. Optional finish: black zinc
  2. Drawers 42 in. [1067 mm] wide or less, drawer width of a standard 4-foot case section: Accuride 3640A all ball bearing slide, with drawer rail/bracket mount, full extension + 1 in. [25 mm] over travel, hold-in detent, and 200 lbs./pr. [91 kg] load rating.
    1. Standard finish: clear zinc
    2. Optional finish: black zinc
  3. Drawers 42 in. [1067 mm] wide or less: Accuride 7957 (7950, non-disconnect) all ball bearing slide, with full extension, handed lever disconnect, and 350 lbs./pr. [159 kg] load rating.
    1. Standard finish: clear zinc
  1. Drawers 42 in. [1067 mm] wide or less: Accuride 9301E ball bearing slide, with no disconnect, full extension, and up to 600 lbs./pr. [181.4 kg] load rating.
    1. Standard finish: clear zinc

SECTION 12 51 00 – OFFICE FURNITURE

  1. Drawers 24 in. [610 mm] wide or less: Accuride 7434 (7432, full extension) all ball bearing slide, with rail mount, full extension + 1 in. [25 mm] over travel, hold-in detent, 100 lbs./pr. [45 kg] load rating, and progressive movement.
    1. Standard finish: clear zinc
    2. Optional finish: black zinc
  2. Drawers 30 in. [762 mm] wide or less: Accuride 3135EC Eclipse, fully concealed undermount slide with ball bearing and polymer rollers, with lever disconnect, full extension, and 100 lbs./pr. [45 kg] load rating.
    1. Standard finish: clear zinc
  1. Drawers 42 in. [1067 mm] wide or less: Accuride 3640A all ball bearing slide, with drawer rail/bracket mount, full extension + 1 in. [25 mm] over travel slides, hold-in detent, and 200 lbs./pr. [91 kg] load rating.
    1. Standard finish: clear zinc
    2. ​Optional finish: black zinc
  2. Drawers 42 in. [1067 mm] wide or less: Accuride 7957 (7950, non-disconnect) all ball bearing slide, with full extension, handed lever disconnect, and 350 lbs./pr. [159 kg] load rating.
    1. ​Standard finish: clear zinc
  3. Drawers 42 in. [1067 mm] wide or less: Accuride 3641 Interlock all ball bearing slide, with drawer rail and pocket mount/ disconnect, full extension + 1 in. [25 mm] over travel, hold-in detent, 180 lbs./pr. [82 kg] load rating, silenced in and out, with interlock anti-tip locking system.
    1. Standard finish: clear zinc
    2. Optional finish: black zinc
    3. Optional gang locking system
  1. Keyboard tray with adjustable tilt plate: Accuride CBERGO-TRAY300 all ball bearing, full extension slides with three-position detent and an integral keyboard tray including gel palm rest, storage compartments, cable management, and mouse pad.

You can also download three-part spec PDF complete with testing information and guidelines.

DOWNLOAD A SPECIFICATION GUIDE

CERTIFIED

Unlike other slides, Accuride is the only company to certify our products with an outside lab, meeting the toughest standards, such as those of AWI, ANSI, and BHMA. We also offer products that are ADA compliant and all models are RoHS compliant.

BHMA Logo
RoHS Logo
ANSI Logo
ADA Logo
ADA Logo
CAD Download Icon

Looking for CADs, Guides, or Some Other Resource?

Need help, information, inspiration? Our resources section has everything from CAD downloads to a library of inspiring application ideas.

FIND A CAD DOCUMENT
EXPLORE RESOURCES

SOLUTIONS DRIVEN

Find the right movement solution, whatever your need. Below are a few examples.

UNLIMITED POSSIBILITIES

Accuride offers numerous special access and closing features to enhance the design and functionality of your casework.

Touch-Release

Just a slight push inward and the slide latch releases, propelling the drawer open 2″.

3832TR, 3832HDTR

See More…

Easy-Close

Bring drawers to a smooth, gentle close every time with our patented Easy-Close feature.

3832EC, 3160EC, 3135EC, 115RC, 3600EC 

See More…

Self-Closing

Accuride Self-Close ensures your application returns to the closed position and remains there until its next use.

3832SC

See More…

Detent-Out

Firmly holds drawers and pull-out surfaces in extended positions.

3832DO, 2109, Keyboard Tray Systems

See More…

Lock-In/Lock-Out

Keeps drawers, trays, and panels secured in closed and open positions for prolonged access.

9308E

See More…

Lock-Out

Locks drawers and other pull-out surfaces in extended position until released by a lever.

2907WB, 340, 3307, 9307

See More…

AN EXPERIENCED SOLUTIONS PARTNER

ACCURIDE IN ACTION

Accuride products are used throughout the globe. Read about how our movement solutions helped modernize one of Europe’s historic sites.

READ AN ACCURIDE CASE STUDY