01

VIEW AS:
Grid List

Items 1 - 12 of 56

per page
  1. 9301E Heavy-Duty & Full Extension Drawer Slide (Non-Disconnect)
    DETAILS
    Each
    Rating:
    0%
    $66.79

    Recently enhanced with increased load capacity and shock-absorbing ball bearing space bumpers that reduce impact noise, the 9301E model is the gentle giant of movement solutions--ready to boost heavy pull-out pantries, service vehicles, and even ATMs. * Supports loads up to 600 lbs. * For drawers up to 42” wide with slide lengths up to 60" * 9301E accessory bracket kits offer bottom and side mount installation options * For additional technical information see below Tested for a total of 50,000…

  2. AL4120 Super Heavy-Duty, Corrosion-Resistant Aluminum Slide (1,212 lbs.,3/4-Extension)
    DETAILS
    Each
    $511.88

    Lightweight aluminum + stainless steel ball bearings = super-strength. Resistant to moisture, humidity, and corrosion, our AL4120 model can tackle any heavy-duty task while enduring harsh, outdoor, or moist environments. * Supports loads up to 1,212 lbs. * Tested drawer width at 24” * For additional technical information see below From woodworking projects to equipment storage and industrial use, this robust solution offers the same smooth, high-performance without adding extra weight to your…

  3. SS0116-BRKT01RC SS0116-BRKT01RC 116RC Recycling Bracket
    DETAILS
    Each
    $50.91

    Return to 116RC Product Detail Page Extra protection + Quality assurance. Engineered specifically for the 116RC model, this recycling bracket protects the carriages on your linear track system when a damper (CB0116-DAMP) is installed to cushion a fixture's end of travel. One recycling bracket is needed for each recirculating ball carriage.

  4. CB0116-DAMP 116RC Damper
    DETAILS
    Each
    $140.31

    Return to 116RC Product Detail Page For robust hardware with a soft side. An optional component for our 116RC Heavy-Duty Linear Track System, this damper cushions and decelerates the last 1.6” of your hardware’s travel for reduced vibration and migration while also providing a smooth, gentle return every time. With the use of this optional damper, end stops are no longer required. However, recycling brackets (SS0166-BRKT01RC) will be needed to protect the carriages, and sliding door fixtures…

  5. FG115-0100T FG115 -0100T 39.37" Aluminum Rail
    DETAILS
    Each
    $64.62

    Return to the FG115 Product Detail Page Lightweight material packed with maximum endurance. Engineered with pre-drilled holes and specially designed to accommodate side-, flat-, and vertical-mounting techniques, this aluminum rail serves as the foundation for the FG115 Linear Friction Guide. Self-lubricated for seamless motion, FG115 rails can be cut to a determined length or butted together for an extended span of travel. For optimal performance and longevity, utilize all fixing holes when…

  6. 2601 Light-Duty Slide with Hold-In Detent
    DETAILS
    Each
    $47.44

    High-performance with a very low profile. Offering full access to stored items with full-extension movement, the 2601 model is light-duty industrial hardware perfect for tool boxes, laboratory equipment, and commercial-grade fixtures. * Supports loads up to 75 lbs. * Tested drawer width at 16” * For additional technical information see below Because of its extra low profile, the 2601 is not available for flat mounting. However, this motion hardware includes an even 0.50” of side-space along with…

  7. 301 Heavy-Duty Low-Profile Slide with Over-Travel
    DETAILS
    Each
    $75.98

    An overachiever with a low profile. Handling heavy-duty, industrial loads, the 301 model also includes over-travel for complete, easy-to-reach access along with an optional bracket kit for electronic enclosure mounting. * Supports loads up to 175 lbs. * Tested drawer width at 16” * For additional technical information see below Non-disconnect motion hardware for added safety in professional workspaces, the 301 is an adept solution for medical equipment, EIA rack-mounted chassis, data processing,…

  8. 3601 Heavy-Duty Over-Travel and Non-Disconnect Slide
    DETAILS
    Each
    $53.41

    Non-disconnect + zero tolerance for subpar motion. Providing extra-safety and additional ease while handling heavier loads, the 3601 speaks for itself by lending high-performing movement to utility and industrial truck bodies, machine tools, mechanical devices, workstations, and more. * Supports loads up to 255 lbs. * Tested drawer width at 16” * For additional technical information see below Also equipped with a hold-in detent to prevent drawer roll-out and bounce-back, the 3601 is prepared to…

  9. CB0115-ECRC 115RC Easy-Close (dampening) Mechanism
    DETAILS
    Each
    $21.40

    Ease + Security + Effortless Linear Motion. Available as an optional accessory, the 115RC Easy-Close Kit adds a patented soft-close feature to your hardware, slowing its movement towards the end of travel. Providing 3 lbs. of pull force and extra resistance, the Easy-Close feature acts similar to a hold-in detent--preventing drawer slamming, racking, and side-to-side movement.

  10. AL0115-0120RC AL0115-0120RC 115RC 47" Aluminum Track
    DETAILS
    Each
    $36.22

    Return to 115RC Product Detail Page Corrosion-resistance + linear motion you can count on. Sold separately yet compatible with both 115RC kits (4180-0756-XE/4180-0746-XE), this 47” aluminum track acts as the solid foundation for a lightweight, reliable movement solution. For further customization, aluminum tracks may be cut to a desired length or butted together to extend length of travel. Note: these aluminum tracks do not come with pre-drilled holes.

  11. AL0115-0240RC AL0115-0240RC 115RC 94" Aluminum Track
    DETAILS
    Each
    $54.50

    Return to 115RC Product Detail Page Corrosion-resistance + linear motion you can count on. Sold separately yet compatible with both 115RC kits (4180-0756-XE/4180-0746-XE), this 94” aluminum track acts as the solid foundation for a lightweight, reliable movement solution. For further customization, aluminum tracks may be cut to a desired length or butted together to extend length of travel. Note: these aluminum tracks do not come with pre-drilled holes.

  12. AL0116-0240RC AL0116-0240RC 116RC 94.5" Aluminum Track
    DETAILS
    Each
    $219.11

    Return to 116RC Product Detail Page Corrosion-resistance + linear motion you can count on. Engineered specifically for the 116RC model, this aluminum track acts as the solid foundation for a heavy-duty yet lightweight movement solution. For further customization, aluminum tracks may be cut to a desired length or butted together to extend length of travel.

VIEW AS:
Grid List

Items 1 - 12 of 56

per page