…synchronizes the elements of the slide to produce smooth and consistent linear movement, the 115 model is a versatile solution that provides support, guidance, or adjustment in a wide array of industrial fixtures and machines. * Supports loads up to 132 lbs. * For additional technical information see below Tested at 10,000 cycles per pair to guarantee unerring strength and endurance, the 115 linear motion slide remains flexible to specific and unique designs with flat-, side-, and…
- AL0115-0120RCH AL0115-0120RCH 115RC 47" Aluminum Track with Pre-Drilled Holes$124.07
Return to 115RC Product Detail Page Corrosion-resistance + linear motion you can count on. Sold separately yet compatible with both 115RC kits (4180-0756-XE/4180-0746-XE), this 47” aluminum track includes pre-drilled holes, acting as the solid foundation for a lightweight, reliable movement solution. For further customization, aluminum tracks may be cut to a desired length or butted together to extend length of travel.
Return to 115RC Product Detail Page Ensuring ease from start to finish. Sold separately or within either 115RC kit (4180-0756-XE/4180-0746-XE), these aluminum end stops ensure that your linear track system ends its length of travel safely and soundly--without slamming or rattling shut. Each order comes with one end stop crafted from corrosion-resistant aluminum and two screws for a breezy installation.
…paired with infinite possibilities. The endlessly versatile 115RC Linear Track System contains lightweight, corrosion-resistant tracks that can be side, flat, or vertically mounted—offering reliable guidance to movable walls, sliding racks, screens, panels, partitions, and even assembly lines. * Supports loads up to 265 lbs. * Aluminum tracks available in two lengths: 47" and 94,” with or without pre-drilled holes Purchase of the 115RC requires the following components: Carriage (Min. Quantity:…
- CB0115-CASSRC CB0115-CASSRC 115RC Cassette with Polymer Bearings$67.69
Return to 115RC Product Detail Page Extra Quiet + The Same High Quality. Sold as a single component or within a 115RC kit (4180-0756-XE), this cassette provides flawless, linear motion to aluminum track systems with the use of polymer bearings that guarantee silenced operation. Easy-to-install and available for flat- or side-mounting, this polymer ball bearing carriage adds effortless and reliable motion to your hardware of choice.
Ease + Security + Effortless Linear Motion. Available as an optional accessory, the 115RC Easy-Close Kit adds a patented soft-close feature to your hardware, slowing its movement towards the end of travel. Providing 3 lbs. of pull force and extra resistance, the Easy-Close feature acts similar to a hold-in detent--preventing drawer slamming, racking, and side-to-side movement.
Return to FG115 Product Detail Page True blue linear motion and friction. Boasting a low-maintenance and cost-effective design with advanced technical polymer, this non-adjust carriage supplies quiet, seamless movement to machinery and other industrial fixtures in need of unerring, repetitive performance. Because the tension between this carriage and an FG115 aluminum rail can't be adjusted, this free floating component is actually ideal for correcting any potential misalignments within a…
Everything you need for effortless linear motion. A complete kit for an easy yet thorough set-up, this 115RC kit includes the following: two polymer ball carriages (CB0115-CASSRC), 2 end stops (AL0115-STOPRC), four M5 ⅝” barrel nuts, and four star washers.
Return to the FG115 Product Detail Page Lightweight material packed with maximum endurance. Engineered with pre-drilled holes and specially designed to accommodate side-, flat-, and vertical-mounting techniques, this aluminum rail serves as the foundation for the FG115 Linear Friction Guide. Self-lubricated for seamless motion, FG115 rails can be cut to a determined length or butted together for an extended span of travel. For optimal performance and longevity, utilize all fixing holes when…
Renowned hardware + The tools you need. Available as an optional accessory for the 115RC Linear Track System, these nuts and washers aid in the installation of any additional carriages your hardware needs. Each order includes two M5 ⅝” barrel nuts and two star washers.
Return to 115RC Product Detail Page Corrosion-resistance + linear motion you can count on. Sold separately yet compatible with both 115RC kits (4180-0756-XE/4180-0746-XE), this 94” aluminum track acts as the solid foundation for a lightweight, reliable movement solution. For further customization, aluminum tracks may be cut to a desired length or butted together to extend length of travel. Note: these aluminum tracks do not come with pre-drilled holes.
- SS0115-CASSRC SS0115-CASSRC 115RC Cassette with Stainless Steel Bearings$67.69
Return to 115RC Product Detail Page Sold as a single component or within a 115RC kit (4180-0746-XE), this cassette model is crafted with stainless steel ball bearings for added strength, providing unerring endurance to your design’s overall function. Easy-to-install and available for flat- or side-mounting, this stainless steel ball bearing carriage adds seamless, smooth motion to your aluminum track hardware.