02 08 8
- Products (9)
Items 1 - 9 of 9
Go with the Accuride Original line of motion hardware. Complete with enhanced strength and movement, full-extension, and a lever-disconnect, the 3832E model is a classic drawer slide that fits a wide range of uses including but not limited to: pull-out shelves, kitchen utensil drawers, and point-of-sales trays. * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below A patented Cam Drawer Adjust allows for precise vertical adjustment, while a…
Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 18” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.
Return to 116RC Product Detail Page Finishing touches for sliding door hardware. Engineered for the 116RC Door Hardware Kit, these fascia end caps stabilize the anodized aluminum fascia board on its support beam, specifically for use with track systems on sliding doors. Each order comes with two fascia end caps and eight screws for a thorough installation and robust solution.
Inset installation made simpler! Engineered for use with our 3135EC Eclipse Undermount solution, this bracket kit assists with implementing a flush inset drawer front in need of concealed hardware. Complete with 2 RoHS-compliant inset assemblies with a zinc finish, two #8 32 flat head screws, and an installation guide--all inside a polybag--this kit is also available for bulk orders, fulfilling projects of any scale.
Lending a hand with overlay installation for your pocket and flipper door applications, this optional clip-on hinge kit is compatible with Accuride models 123 and 1234. Each kit includes two zinc 40mm overlay clip-on hinges, 2 base plates, four #6 screws, four #8 screws, and one “Caution” sticker.
Need extra connector clips for your pocket and flipper doors? We've got you covered. Working with vertically-mounted models, such as the 1332 and 1432, this kit includes an extra connector clip and installation screws for steadfast durability and convenience. Each kit includes one stainless steel connector clip, two #8 x ⅜” black electroplate pan-head screws (without hinge base plate), two #8 x ⅝” zinc flat head screws (with hinge base plate), as well as one ‘Caution’ sticker.
Designed to withstand moderate weather conditions. With a special, weather-resistant coating that provides eight times more protection than a standard zinc finish, the CH3832E model is perfect for fixtures and hardware that receive exposure to the elements--such as greenhouses, locker rooms, garages, grill stations, and more! * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below Comprised of a stainless-steel ball retainer, ball bearings,…
Lending a hand with inset installation for thicker pocket and flipper door applications, this optional clip-on hinge kit is compatible with Accuride models 123 and 1234. Each kit includes two zinc 40mm inset clip-on hinges, 2 base plates, four #6 screws, four #8 screws, and one “Caution” sticker.
The CB3620-258TV is a heavy-duty drawer slide ideal for media centers. * Supports loads up to 225 lbs. * 14"-extension * For additional technical information see below The CB3620-258TV includes hold-in detent to prevent roll-out and bounce-back.
Items 1 - 9 of 9