04 02 3
- Products (4)
Items 1 - 4 of 4
…is equipped with the following helpers: * 3/32” Drill Bit: This bit works with the Accuride Drilling Jig (4180-0568-XE) to pre-drill holes for disconnect levers. * 4 + ¾” Drill Extension: Paired with the 3/32” Drill Bit, this extension improves access when pre-drilling disconnect lever holes at the required 10-degree angle. * #2 x 4” Phillips Point Screwdriver Bit: The length on this bit gives installers better access when installing the screws for the disconnect levers. * ¼” Brad Point Drill…
Motion hardware 2.0. Providing ¾-extension and two-way access for pass-through shelves, kitchen islands, and medical carts, the 2002 model enhances any home or workspace with double the amount of function and chic. * Supports loads up to 50 lbs. * For drawers up to 12” wide * For additional technical information see below Including a center detent that keeps hardware solidly positioned when closed from either direction, this double-extension solution is also fit with tabs for quick mounting of…
Stainless steel hardware with a narrow profile. With a corrosion-resistant coating, the SS2028 model is perfect for fixtures that need to withstand moisture or high levels of humidity--including but not limited to industrial machines, outdoor hardware, and commercial or residential kitchens. * Supports loads up to 100 lbs. * For drawers up to 18” wide * For additional technical information see below Non-disconnect for added safety, the SS2028 also includes a standard ¾-extension and a hold-in…
Lending a hand with overlay installation for your pocket and flipper door applications, this optional clip-on hinge kit is compatible with Accuride models 123 and 1234. Each kit includes two zinc 40mm overlay clip-on hinges, 2 base plates, four #6 screws, four #8 screws, and one “Caution” sticker.
Items 1 - 4 of 4