- Products (10)
Items 1 - 10 of 10
Go with the Accuride Original line of motion hardware. Complete with enhanced strength and movement, full-extension, and a lever-disconnect, the 3832E model is a classic drawer slide that fits a wide range of uses including but not limited to: pull-out shelves, kitchen utensil drawers, and point-of-sales trays. * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below A patented Cam Drawer Adjust allows for precise vertical adjustment, while a…
Lending a hand with overlay installation for your pocket and flipper door applications, this optional clip-on hinge kit is compatible with Accuride models 123 and 1234. Each kit includes two zinc 40mm overlay clip-on hinges, 2 base plates, four #6 screws, four #8 screws, and one “Caution” sticker.
Return to 116RC Product Detail Page Finishing touches for sliding door hardware. Engineered for the 116RC Door Hardware Kit, these fascia end caps stabilize the anodized aluminum fascia board on its support beam, specifically for use with track systems on sliding doors. Each order comes with two fascia end caps and eight screws for a thorough installation and robust solution.
Inset installation made simpler! Engineered for use with our 3135EC Eclipse Undermount solution, this bracket kit assists with implementing a flush inset drawer front in need of concealed hardware. Complete with 2 RoHS-compliant inset assemblies with a zinc finish, two #8 32 flat head screws, and an installation guide--all inside a polybag--this kit is also available for bulk orders, fulfilling projects of any scale.
…the Accuride Drilling Jig (4180-0568-XE) to pre-drill holes for disconnect levers. * 4 + ¾” Drill Extension: Paired with the 3/32” Drill Bit, this extension improves access when pre-drilling disconnect lever holes at the required 10-degree angle. * #2 x 4” Phillips Point Screwdriver Bit: The length on this bit gives installers better access when installing the screws for the disconnect levers. * ¼” Brad Point Drill Bit: This bit is designed for drilling the hook holes in the back of the drawer.…
Everything you need for effortless linear motion. A complete kit for an easy yet thorough set-up, this 115RC kit includes the following: two polymer ball carriages (CB0115-CASSRC), 2 end stops (AL0115-STOPRC), four M5 ⅝” barrel nuts, and four star washers.
- 4180-0746-XE 115RC Hardware Kit with Stainless Steel Ball Carriages$150.14
Everything you need for effortless linear motion. A complete kit for an easy yet thorough set-up, this 115RC kit includes the following: two stainless steel ball carriages (SS0115-CASSRC), 2 end stops (AL0115-STOPRC), four M5 ⅝” barrel nuts, and four star washers.
Pilaster kit for use on 3832 and 2132 slides.
A state-of-the-art sliding solution. With ADA-compliant linear motion and design, the 116RC model is an innovative breakthrough for the sliding door market, also accommodating large screens, panels, movable walls, barn doors, and so much more. * Supports loads up to 793 lbs. * Aluminum track in a choice of two lengths: 94.5" and 142" Purchase of the 116RC requires the following components Carriage (Min. Quantity: 1) * SS0116-CASSRC: Carriage – Stainless Steel Balls * CB0116-CASSRC: Carriage –…
Lending a hand with inset installation for thicker pocket and flipper door applications, this optional clip-on hinge kit is compatible with Accuride models 123 and 1234. Each kit includes two zinc 40mm inset clip-on hinges, 2 base plates, four #6 screws, four #8 screws, and one “Caution” sticker.
Items 1 - 10 of 10