Items 1 - 12 of 20
You can’t beat fantastic first-class function. The 2907 is a small yet impactful movement solution that can be found on the Tera 100 Supercomputer, the most powerful system in Europe. With its handy lock-out feature, this slide guarantees security and stability during maintenance and service for electronic enclosures. * Supports loads up to 115 lbs. * Tested chassis width at 16” * Designed for 1U-3U chassis * For additional technical information see below Offering over-travel for full wiring and…
Because heavier-duty shouldn’t mean more difficult. Specially designed to handle heavier chassis from 4U to 8U, the 3507 model also includes 2” of substantial over-travel for additional ease of access and maintenance, along with a convenient lock-out to hold chassis open for extended periods. * Supports loads up to 200 lbs. * Tested chassis width at 16” * For additional technical information see below Including guide pins that provide stability and cable management that allows for direct…
Bringing maximum versatility and utility to electronic enclosures, the 2907WB includes reversible mounting brackets and a slide-to-chassis hole pattern that allows for more options in positioning chassis and mounting configurations. * Supports loads up to 120 lbs. * Tested chassis width at 16” * Designed for 1U-3U chassis * For additional technical information see below With a unique thumb screw fastener, this slide adapts to round, square, or tapped holes on rails and provides tool-less pin…
Compatible with our 1332 solution and accommodating pocket doors ¾” to 13/16” thick, this hinge kit provides the extra tools you need for an inset installation. Each order includes two 35mm salice black clip-on hinges, two 3mm mounting base plates, two 3mm hinge base spacers, two hinge arm cover caps, four #6 x ⅝” Phillips flat head screws, and one “Caution” door sticker.
Renowned hardware + The tools you need. Available as an optional accessory for the 115RC Linear Track System, these nuts and washers aid in the installation of any additional carriages your hardware needs. Each order includes two M5 ⅝” barrel nuts and two star washers.
Working with both of our commercial-grade undermount solutions, the Eclipse Lever Disconnect adds this resilient feature to your choice between the 3135EC and 3160EC (for wider drawers). Used with the handy drill extension in our optional Eclipse Tool Kit, installation is made extra-quick and hassle-free. Even with already smooth and seamless motion hardware such as the 3135EC and 3160EC, a lever disconnect gives your fixtures an extra boost of convenience for spaces that will benefit from…
Everything you need for effortless linear motion. A complete kit for an easy yet thorough set-up, this 115RC kit includes the following: two polymer ball carriages (CB0115-CASSRC), 2 end stops (AL0115-STOPRC), four M5 ⅝” barrel nuts, and four star washers.
Compatible with the 3160EC Eclipse Undermount slide for drawers up to 42” wide, this drawer stabilizer kit provides strength and stability for wider drawers while also eliminating racking, side-to-side movement, and hardware failure. Comprised of two stabilizer carrier strips, the installer attaches the included connector clips and pulley bracket for a trouble-free process and extra-durable finished fixture.
Rear bracket for face frame installation, compatible with 3832EC
A pair of rear brackets for adapting the 3800 series of slides into fame frame cabinetry. Compatible models include: * 3832E * 3832EDO * 3832ESC * 3832EHDSC * 3834E * 3834ESC
Rear bracket for installing 3832 Touch-Release slides into face frame cabinets. Each kit includes: * Compatible with 3832ETR and 3832EHDTR
- 4180-0746-XE 115RC Hardware Kit with Stainless Steel Ball Carriages$163.65
Everything you need for effortless linear motion. A complete kit for an easy yet thorough set-up, this 115RC kit includes the following: two stainless steel ball carriages (SS0115-CASSRC), 2 end stops (AL0115-STOPRC), four M5 ⅝" barrel nuts, and four star washers.
Items 1 - 12 of 20