10

VIEW AS:
Grid List

Items 1 - 12 of 37

per page
  1. Recently enhanced with increased load capacity and shock-absorbing ball bearing space bumpers that reduce impact noise, the 9301E model is the gentle giant of movement solutions--ready to boost heavy pull-out pantries, service vehicles, and even ATMs. * Supports loads up to 600 lbs. * For drawers up to 42” wide with slide lengths up to 60" * 9301E accessory bracket kits offer bottom and side mount installation options * For additional technical information see below Tested for a total of 50,000…

  2. Always on the go with precious cargo in tow? We’ve got you covered. Our newly enhanced 9308E solution is fit with improved lock-in/lock-out springs, ensuring your items and equipment stay safely stowed away while remaining easier to access than ever. * Supports loads up to 600 lbs. * Optional platform bracket kit allows for bottom and side mount applications * For additional technical information see below From heavy-duty fixtures and appliances around the home to drawers and trays for gear on…

  3. Go with the Accuride Original line of motion hardware. Complete with enhanced strength and movement, full-extension, and a lever-disconnect, the 3832E model is a classic drawer slide that fits a wide range of uses including but not limited to: pull-out shelves, kitchen utensil drawers, and point-of-sales trays. * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below A patented Cam Drawer Adjust allows for precise vertical adjustment, while a…

  4. The 3306DO is a medium-duty and over-travel slide perfect for use in transportation, workstations, and kiosks. The 3306DO has a lock-in feature to keep drawers closed in transit, and detent-out to hold drawers open when needed. * Supports loads up to 150 lbs. * 1" over-travel * Lock-in feature * Hold-out detent The 3306DO comes tested at 10,000 cycles and includes a Limited Lifetime Warranty. For an alternative with lock-out, see the Accuride 3308.

  5. Shallow yet smooth motion hardware. Engineered with a low-profile and lever-disconnect, the 2132 model sets a new standard for the ¾-extension slide. Ideal for small, shallow drawers in office desks, bathrooms, and kitchens, this solution keeps supplies and utensils readily available, day-in and day-out. * Supports loads up to 75 lbs. * For drawers up to 16” wide * For additional technical information see below Backed by BHMA & AWI certification, the 2132 also boasts a hold-in detent and…

  6. Compatible with the CBLIFT-0019 Ascent, these additional weight packs provide counterbalancing weight to ensure proper movement for your concealed flat screen motion hardware. Each kit comes with 10 additional 3.88 oz. weights.

  7. The original undermount drawer slide. Eliminating side-space requirements while creating a seamless design, the 1029 model is a single slide, concealed solution perfect for residential cabinetry and furniture as well as small retail displays and storage. * Supports loads up to 35 lbs. * For drawers up to 16” wide * For additional technical information see below Offering ¾-extension and a convenient friction disconnect, this undermount motion hardware is a go-to choice for modern renovations and…

  8. High-performance with a very low profile. Offering full access to stored items with full-extension movement, the 2601 model is light-duty industrial hardware perfect for tool boxes, laboratory equipment, and commercial-grade fixtures. * Supports loads up to 75 lbs. * Tested drawer width at 16” * For additional technical information see below Because of its extra low profile, the 2601 is not available for flat mounting. However, this motion hardware includes an even 0.50” of side-space along with…

  9. 5410-0801-CE 16" Clip-On Bracket
    Rating:
    0%
    $5.44

    Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 16” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.

  10. Working with both CBHAND kits, one order includes two stainless steel rods that aid in lock-in and/or lock-out conversions for models 3640A, 7950, 7957, 9301, or other slides with cross-sections of .75” or more.

  11. An electronic enclosure solution that keeps a low profile. Specially developed for 1U to 2U chassis, the 2807 model offers a flock of handy features including over-travel, narrow side space, and enhanced friction movement for superior efficiency and performance. * Supports loads up to 100 lbs. * Tested chassis width at 16” * For additional technical information see below This electronic enclosure motion hardware comes with a fixed front bracket and adjustable rear bracket for added versatility…

  12. Enhanced movement and extended access. Designed for pocket & bayonet mounting in metal hardware and fixtures, the 9328E enables tool-less installation that’s labor-saving and cost-effective for equipment drawers or trays in various large vehicles intended for emergency, utility, hazmat, or recreational use. * Supports loads up to 360 lbs. * Tested drawer width up to 32” * For additional technical information see below Fit with an enhanced lock-in and lock-out designed for added reliability, the…

VIEW AS:
Grid List

Items 1 - 12 of 37

per page