115

  • Products (22)
VIEW AS:
Grid List

Items 1 - 12 of 22

  • 1
  • 2
per page
  1. …synchronizes the elements of the slide to produce smooth and consistent linear movement, the 115 model is a versatile solution that provides support, guidance, or adjustment in a wide array of industrial fixtures and machines. * Supports loads up to 132 lbs. * For additional technical information see below Tested at 10,000 cycles per pair to guarantee unerring strength and endurance, the 115 linear motion slide remains flexible to specific and unique designs with flat-, side-, and…

  2. Renowned hardware + The tools you need. Available as an optional accessory for the 115RC Linear Track System, these nuts and washers aid in the installation of any additional carriages your hardware needs. Each order includes two M5 ⅝” barrel nuts and two star washers.

  3. Return to 115RC Product Detail Page Corrosion-resistance + linear motion you can count on. Sold separately yet compatible with both 115RC kits (4180-0756-XE/4180-0746-XE), this 47” aluminum track includes pre-drilled holes, acting as the solid foundation for a lightweight, reliable movement solution. For further customization, aluminum tracks may be cut to a desired length or butted together to extend length of travel.

  4. Return to 115RC Product Detail Page Corrosion-resistance + linear motion you can count on. Sold separately yet compatible with both 115RC kits (4180-0756-XE/4180-0746-XE), this 94” aluminum track acts as the solid foundation for a lightweight, reliable movement solution. For further customization, aluminum tracks may be cut to a desired length or butted together to extend length of travel. Note: these aluminum tracks do not come with pre-drilled holes.

  5. Return to 115RC Product Detail Page Corrosion-resistance + linear motion you can count on. Sold separately yet compatible with both 115RC kits (4180-0756-XE/4180-0746-XE), this 94” aluminum track includes pre-drilled holes, acting as the solid foundation for a lightweight, reliable movement solution. For further customization, aluminum tracks may be cut to a desired length or butted together to extend length of travel.

  6. Return to 115RC Product Detail Page Extra Quiet + The Same High Quality. Sold as a single component or within a 115RC kit (4180-0756-XE), this cassette provides flawless, linear motion to aluminum track systems with the use of polymer bearings that guarantee silenced operation. Easy-to-install and available for flat- or side-mounting, this polymer ball bearing carriage adds effortless and reliable motion to your hardware of choice.

  7. …paired with infinite possibilities. The endlessly versatile 115RC Linear Track System contains lightweight, corrosion-resistant tracks that can be side, flat, or vertically mounted—offering reliable guidance to movable walls, sliding racks, screens, panels, partitions, and even assembly lines. * Supports loads up to 265 lbs. * Aluminum tracks available in two lengths: 47" and 94,” with or without pre-drilled holes Purchase of the 115RC requires the following components: Carriage (Min. Quantity:…

  8. A bold yet versatile movement solution, the FG115 uses a self-lubricating carriage and rail to bring motion to your designs—rather than ball bearings in traditional slides and linear track systems. With multiple adjust options (Auto, Non, and Manual) as well as corrosion-resistant aluminum, this friction guide can handle any task and endure the harshest environments. * Supports loads up to 4,000N (900 lbf.) * Aluminum track available in two lengths: 1 meter or 2 meters. * For additional…

  9. Return to 115RC Product Detail Page Ensuring ease from start to finish. Sold separately or within either 115RC kit (4180-0756-XE/4180-0746-XE), these aluminum end stops ensure that your linear track system ends its length of travel safely and soundly--without slamming or rattling shut. Each order comes with one end stop crafted from corrosion-resistant aluminum and two screws for a breezy installation.

  10. Everything you need for effortless linear motion. A complete kit for an easy yet thorough set-up, this 115RC kit includes the following: two stainless steel ball carriages (SS0115-CASSRC), 2 end stops (AL0115-STOPRC), four M5 ⅝” barrel nuts, and four star washers.

  11. The original undermount drawer slide. Eliminating side-space requirements while creating a seamless design, the 1029 model is a single slide, concealed solution perfect for residential cabinetry and furniture as well as small retail displays and storage. * Supports loads up to 35 lbs. * For drawers up to 16” wide * For additional technical information see below Offering ¾-extension and a convenient friction disconnect, this undermount motion hardware is a go-to choice for modern renovations and…

  12. Return to FG115 Product Detail Page Precision + Preload = Perfect Friction Movement. Adhering to the ISO Standard 12090 size, this manual adjust carriage is designed from lightweight advanced technical polymer that ensures smooth and seamless motion for automation, industrial machines, and assembly lines. With the use of an allen wrench (not included), the friction between this component and aluminum rail (sold separately) can be fine tuned to the specific preload or clearance your hardware…

VIEW AS:
Grid List

Items 1 - 12 of 22

  • 1
  • 2
per page