3832e

  • Products (21)
VIEW AS:
Grid List

Items 1 - 12 of 21

  • 1
  • 2
per page
  1. …trays. * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below A patented Cam Drawer Adjust allows for precise vertical adjustment, while a new face frame hole provides easy access to mounting. With a hold-in detent that prevents roll-out and bounce-back and silenced operation, the 3832E sets a new status quo for high-performance movement solutions. 3832E is also BHMA & AWI certified for third-party validation and quality assurance.

  2. Pilaster kit for use on 3832 and 2132 slides.

  3. 4180-0322-XE 3832E Face Frame kit
    $8.00

    A face frame kit for use on the 3832E.

  4. With an automatic reset stroke of 1.75", the 3832EC model brings drawers to a controlled and satisfying close every single time. Add a bit of much-needed ease to hardware in the home, industrial workspaces, or institutional equipment. * Supports loads up to 100 lbs. * For drawers up to 16” wide * For additional technical information see below Engineered with the end-user in mind, the 3832EC’s Easy-Close mechanism remains partially shielded to prevent small debris particles from interfering with…

  5. With an automatic reset stroke of 1.75", the 3832EC model brings drawers to a controlled and satisfying close every single time. Add a bit of much-needed ease to hardware in the home, industrial workspaces, or institutional equipment. * Supports loads up to 100 lbs. * For drawers up to 16” wide * For additional technical information see below Engineered with the end-user in mind, the 3832EC’s Easy-Close mechanism remains partially shielded to prevent small debris particles from interfering with…

  6. Go with the Accuride Original line of motion hardware. Complete with enhanced strength and movement, full-extension, and a lever-disconnect, the 3832E model is a classic drawer slide that fits a wide range of uses including but not limited to: pull-out shelves, kitchen utensil drawers, and point-of-sales trays. * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below A patented Cam Drawer Adjust allows for precise vertical adjustment, while a…

  7. A pair of rear brackets for adapting the 3800 series of slides into fame frame cabinetry. Compatible models include: * 3832E * 3832EDO * 3832ESC * 3832EHDSC * 3834E * 3834ESC

  8. Achieve a new kind of effortless with this Accuride Original. Activated by a push that requires just 5 lbs. of ADA-compliant force, the 3832ETR model propels your hardware into the future. Eliminating the need for knobs or handles, this specialty slide creates sleek cabinetry matched with seamless performance. * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below Adding ease to a wide array of spaces, the 3832ETR is specially optimized for…

  9. Go with the Accuride Original line of motion hardware. Complete with enhanced strength and movement, full-extension, and a lever-disconnect, the 3832E model is a classic drawer slide that fits a wide range of uses including but not limited to: pull-out shelves, kitchen utensil drawers, and point-of-sales trays. * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below A patented Cam Drawer Adjust allows for precise vertical adjustment, while a…

  10. Designed to withstand moderate weather conditions. With a special, weather-resistant coating that provides eight times more protection than a standard zinc finish, the CH3832E model is perfect for fixtures and hardware that receive exposure to the elements--such as greenhouses, locker rooms, garages, grill stations, and more! * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below Comprised of a stainless-steel ball retainer, ball bearings,…

  11. Our Accuride Original slide packed with a little more common sense. The 3832EDO is specially crafted with longer spacers and additional bearings, while also designed with a hold-out detent to keep pull-out surfaces and drawers solidly positioned. * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below Backed by AWI & BHMA certification, this motion hardware is a beautiful addition to kitchens, workspaces, and retail stores. With easy access…

  12. 5410-0804-CE 22" Clip-On Bracket
    $4.34

    Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 22” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.

VIEW AS:
Grid List

Items 1 - 12 of 21

  • 1
  • 2
per page