Your company account is blocked and you cannot place orders. If you have questions, please contact your company administrator.

4

VIEW AS:
Grid List

Items 1 - 12 of 30

per page
  1. 9300 Bracket Kits Platform Bracket Kits for 9300 Series
    DETAILS
    $43.26

    Allows users to platform-mount 9300 Series slides. Includes:* Two brackets* Four 1/4" hex-head screws and nuts * Locking washers Compatible with 9301E, 9307E, and 9308E slides,

  2. 3834ESC Light-Duty Over-Travel Slide with Self-Close and Lever-Disconnect
    DETAILS
    $15.42

    Over-travel + Self-close = stellar motion hardware. Supplying full-access to stored items and contents, the 3834ESC model also contains our handy self-closing feature, which closes drawers with just a light push and keeps them safely closed. * Supports loads up to 90 lbs. * For drawers up to 24” wide * For additional technical information see below From residential casework to retail displays and institutional fixtures or equipment, the 3834ESC remains one of our savviest solutions, prioritizing…

  3. AL4120 Super Heavy-Duty, Corrosion-Resistant Aluminum Slide (1,212 lbs.,3/4-Extension)
    DETAILS
    $511.88

    Lightweight aluminum + stainless steel ball bearings = super-strength. Resistant to moisture, humidity, and corrosion, our AL4120 model can tackle any heavy-duty task while enduring harsh, outdoor, or moist environments. * Supports loads up to 1,212 lbs. * Tested drawer width at 24” * For additional technical information see below From woodworking projects to equipment storage and industrial use, this robust solution offers the same smooth, high-performance without adding extra weight to your…

  4. 4180-0603-XE Eclipse Toolkit
    DETAILS
    $43.91

    …is equipped with the following helpers: * 3/32” Drill Bit: This bit works with the Accuride Drilling Jig (4180-0568-XE) to pre-drill holes for disconnect levers. * 4 + ¾” Drill Extension: Paired with the 3/32” Drill Bit, this extension improves access when pre-drilling disconnect lever holes at the required 10-degree angle. * #2 x 4” Phillips Point Screwdriver Bit: The length on this bit gives installers better access when installing the screws for the disconnect levers. * ¼” Brad Point Drill…

  5. AL4190 Medium-Duty Slide with Tilt-Track System
    DETAILS
    $354.90

    …* Supports loads up to 140 lbs. * For drawers up to 40” wide * Aluminum track in lengths of 24" and 40" * For additional technical information see below * Kit contains: 2 Aluminum Tracks, track cover caps, roller wheel assemblies, track rollers and 4 bumper and end stops.  Made with aluminum tracks that can be cut to a custom length, the AL4190 guarantees corrosion-resistance — all the better for mobile or industrial use. This specialty solution is crafted to be fully adjustable with an optional…

  6. 4180-0604-XE 3135EC Inset Face Frame Bracket Kit
    DETAILS
    $7.46

    Inset installation made simpler! Engineered for use with our 3135EC Eclipse Undermount solution, this bracket kit assists with implementing a flush inset drawer front in need of concealed hardware. Complete with 2 RoHS-compliant inset assemblies with a zinc finish, two #8 32 flat head screws, and an installation guide--all inside a polybag--this kit is also available for bulk orders, fulfilling projects of any scale.

  7. 3634EC Medium-Duty & Over-Travel Slide with Easy-Close
    DETAILS
    $52.18

    Resilience and high-performance with an extra side of ease. Our 3634EC model offers a coveted Easy-Close action for wider drawers, trays, and storage bins in a full range of settings and projects. * Supports loads up to 150 lbs. * For drawers up to 42" wide * Recommended drawer box size 1 + 9/16" less than the cabinet opening. * For additional technical information see below Not only does this over-travel solution promise a smooth and gentle close after every use, but this slide also contains…

  8. 4180-0569-XE 3135EC Bottom Mount Bracket Kit
    DETAILS
    $12.49

    Bottom mount + top-of-mind. Compatible with the 3135EC Eclipse Undermount solution, this bracket kit supplies the tools and instructions for installing the 3135EC for fixtures and frames that require a bottom mount technique. Including four bottom-mount brackets with a zinc finish, this kit also contains eight #8 32 + ¼" self-tapping screws and an installation guide. One RoHS-compliant kit accommodates one pair of 3135EC slides, with bulk orders also available.

  9. 3834E Light-Duty Over-Travel Slide with Lever-Disconnect and Zinc Finish
    DETAILS
    $10.73

    You'll never have trouble reaching the back of the drawer ever again. Designed with 1" over-travel, the 3834E model is an enhanced movement solution, providing strength, convenience, and smooth motion to residential and commercial fixtures in need of extra access. * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below On top of silenced operation, the 3834E boasts a hold-in detent to prevent drawer roll-out and bounce-back--you can say…

  10. FG115 Light-Duty Linear Friction Guide System
    DETAILS
    $29.99

    A bold yet versatile movement solution, the FG115 uses a self-lubricating carriage and rail to bring motion to your designs—rather than ball bearings in traditional slides and linear track systems. With multiple adjust options (Auto, Non, and Manual) as well as corrosion-resistant aluminum, this friction guide can handle any task and endure the harshest environments. * Supports loads up to 4,000N (900 lbf.) * Aluminum track available in two lengths: 1 meter or 2 meters. * For additional…

  11. Because heavier-duty shouldn’t mean more difficult. Specially designed to handle heavier chassis from 4U to 8U, the 3507 model also includes 2” of substantial over-travel for additional ease of access and maintenance, along with a convenient lock-out to hold chassis open for extended periods. * Supports loads up to 200 lbs. * Tested chassis width at 16” * For additional technical information see below Including guide pins that provide stability and cable management that allows for direct…

  12. Stainless steel hardware with a narrow profile. With a corrosion-resistant coating, the SS2028 model is perfect for fixtures that need to withstand moisture or high levels of humidity--including but not limited to industrial machines, outdoor hardware, and commercial or residential kitchens. * Supports loads up to 100 lbs. * For drawers up to 18” wide * For additional technical information see below Non-disconnect for added safety, the SS2028 also includes a standard ¾-extension and a hold-in…

VIEW AS:
Grid List

Items 1 - 12 of 30

per page