4180 0566 xe
- Products (49)
A bracket kit for flush inset drawer fronts. Compatible with our 3135EC undermount solution, this kit includes one pair of bottom inset bracket assemblies in a zinc finish, adding ease and precision to alternative frames and mounting styles. For thorough installation, a rear face frame bracket (4180-0656-XE) is also required. Along with both brackets, this single kit also comes with two each #8-32 flat head screws, and an installation guide inside a polybag. Cabinet mounting screws are not…
Come extra-prepared with tools for your undermount solution. Compatible with our 3135EC model, the Eclipse Tool Kit quickens and simplifies drawer box prep with all the tools you need to drill and pre-drill holes and mounting locations for your frames and fixtures. Setting up your project for easy success, the Eclipse Tool Kit is equipped with the following helpers: * 3/32” Drill Bit: This bit works with the Accuride Drilling Jig (4180-0568-XE) to pre-drill holes for disconnect levers. * 4 + ¾”…
Compatible with our 2109 Variable Height Keyboard Slide, this zinc-finished bracket kit allows installers to decide on the most suitable positioning for their hardware, inboard or outboard, while also accommodating suspension adjustment. Each kit includes four mounting brackets as well as bracket mounting screws and slide mounting screws for a convenient and efficient installation process.
Compatible with our 2109 Variable Height Keyboard Slide, this black electroplate finish bracket kit allows installers to decide on the most suitable positioning for their hardware, inboard or outboard, while also accommodating suspension adjustment. Each kit includes four mounting brackets as well as bracket mounting screws and slide mounting screws for a convenient and efficient installation process.
Everything you need for effortless linear motion. A complete kit for an easy yet thorough set-up, this 115RC kit includes the following: two polymer ball carriages (CB0115-CASSRC), 2 end stops (AL0115-STOPRC), four M5 ⅝” barrel nuts, and four star washers.
Renowned hardware + The tools you need. Available as an optional accessory for the 115RC Linear Track System, these nuts and washers aid in the installation of any additional carriages your hardware needs. Each order includes two M5 ⅝” barrel nuts and two star washers.
- 4180-0746-XE 115RC Hardware Kit with Stainless Steel Ball Carriages$150.14
Everything you need for effortless linear motion. A complete kit for an easy yet thorough set-up, this 115RC kit includes the following: two stainless steel ball carriages (SS0115-CASSRC), 2 end stops (AL0115-STOPRC), four M5 ⅝” barrel nuts, and four star washers.
Precision and ease collide with our Eclipse Jig! Compatible with our 3135EC undermount solution, the Eclipse Drill Jig lends an extra hand for seamless installation, aiding in lever-disconnect assemblies, drawer hooks, front face frame holes, and front side mounts (37mm). For optimal ease and outcomes, we recommend also using the 3/32” Drill Bit (in the optional Eclipse Tool Kit) to control drill depth when drilling.
Made to accompany our 3135EC, this bracket kit aids in easy-access installation for rear-facing frames and fixtures in need of concealed hardware. Including two rear brackets with a clear zinc finish, this kit also contains six #8 x ⅝” screws and an installation guide--all inside a polybag. This kit is also RoHS-compliant and available for bulk orders.
Bottom mount + top-of-mind. Compatible with the 3135EC Eclipse Undermount solution, this bracket kit supplies the tools and instructions for installing the 3135EC for fixtures and frames that require a bottom mount technique. Including four bottom-mount brackets with a zinc finish, this kit also contains eight #8 32 + ¼" self-tapping screws and an installation guide. One RoHS-compliant kit accommodates one pair of 3135EC slides, with bulk orders also available.
Inset installation made simpler! Engineered for use with our 3135EC Eclipse Undermount solution, this bracket kit assists with implementing a flush inset drawer front in need of concealed hardware. Complete with 2 RoHS-compliant inset assemblies with a zinc finish, two #8 32 flat head screws, and an installation guide--all inside a polybag--this kit is also available for bulk orders, fulfilling projects of any scale.
Working with both of our commercial-grade undermount solutions, the Eclipse Lever Disconnect adds this resilient feature to your choice between the 3135EC and 3160EC (for wider drawers). Used with the handy drill extension in our optional Eclipse Tool Kit, installation is made extra-quick and hassle-free. Even with already smooth and seamless motion hardware such as the 3135EC and 3160EC, a lever disconnect gives your fixtures an extra boost of convenience for spaces that will benefit from…