50”

VIEW AS:
Grid List

Items 1 - 12 of 61

per page
  1. 9301E Heavy-Duty & Full Extension Drawer Slide (Non-Disconnect)
    DETAILS
    Each
    Rating:
    0%
    $66.79

    Recently enhanced with increased load capacity and shock-absorbing ball bearing space bumpers that reduce impact noise, the 9301E model is the gentle giant of movement solutions--ready to boost heavy pull-out pantries, service vehicles, and even ATMs. * Supports loads up to 600 lbs. * For drawers up to 42” wide with slide lengths up to 60" * 9301E accessory bracket kits offer bottom and side mount installation options * For additional technical information see below Tested for a total of 50,000…

  2. AL0115-0120RC AL0115-0120RC 115RC 47" Aluminum Track
    DETAILS
    Each
    $36.22

    Return to 115RC Product Detail Page Corrosion-resistance + linear motion you can count on. Sold separately yet compatible with both 115RC kits (4180-0756-XE/4180-0746-XE), this 47” aluminum track acts as the solid foundation for a lightweight, reliable movement solution. For further customization, aluminum tracks may be cut to a desired length or butted together to extend length of travel. Note: these aluminum tracks do not come with pre-drilled holes.

  3. 4180-0650-XE CBLIFT-050 Fixed Lid Bracket
    DETAILS
    Each
    $183.51

    Quick-install + Quick lift. This additional kit provides a fixed lid bracket compatible with our CBLIFT-050 model for concealing flat screens in your wood cabinetry.

  4. FG115-0100T FG115 -0100T 39.37" Aluminum Rail
    DETAILS
    Each
    $64.62

    Return to the FG115 Product Detail Page Lightweight material packed with maximum endurance. Engineered with pre-drilled holes and specially designed to accommodate side-, flat-, and vertical-mounting techniques, this aluminum rail serves as the foundation for the FG115 Linear Friction Guide. Self-lubricated for seamless motion, FG115 rails can be cut to a determined length or butted together for an extended span of travel. For optimal performance and longevity, utilize all fixing holes when…

  5. FG115 -0200T FG115 -0200T 78.74" Aluminum Rail
    DETAILS
    Each
    $129.23

    Return to FG115 Product Detail Page Lightweight + Low-maintenance. One meter longer than its counterpart (FG115-0100T), this rail is made from the same hard anodized aluminum that serves as the basis for the FG115 Linear Motion Guide's fluid movement and tough outer coating that requires minimal upkeep. Self-lubricated for seamless motion, FG115 rails can be cut to a determined length or butted together for an extended span of travel. For optimal performance and longevity, utilize all fixing…

  6. AL0115-0240RC AL0115-0240RC 115RC 94" Aluminum Track
    DETAILS
    Each
    $54.50

    Return to 115RC Product Detail Page Corrosion-resistance + linear motion you can count on. Sold separately yet compatible with both 115RC kits (4180-0756-XE/4180-0746-XE), this 94” aluminum track acts as the solid foundation for a lightweight, reliable movement solution. For further customization, aluminum tracks may be cut to a desired length or butted together to extend length of travel. Note: these aluminum tracks do not come with pre-drilled holes.

  7. 7950 Heavy-Duty Full Extension Non-Disconnect Slide
    DETAILS
    Each
    $59.05

    Extra-strength meets versatility. Uniquely engineered for drawers and shelves up to 42" wide, our 7950 Heavy-Duty Full-Extension Slide can be side- or flat-mounted in hardware and fixtures for cookware, toolboxes, equipment storage, and so much more. * Side-mount load capacity up to 350 lbs. * Flat-mount load capacity up to 150 lbs. * For drawers up to 42” wide * For additional technical information see below Designed with a bridged ball retainer that keeps your sliding hardware in sync, the…

  8. AL0115-0240RCH AL0115-0240RCH 115RC 94" Aluminum Track with Pre-Drilled Holes
    DETAILS
    Each
    $109.86

    Return to 115RC Product Detail Page Corrosion-resistance + linear motion you can count on. Sold separately yet compatible with both 115RC kits (4180-0756-XE/4180-0746-XE), this 94” aluminum track includes pre-drilled holes, acting as the solid foundation for a lightweight, reliable movement solution. For further customization, aluminum tracks may be cut to a desired length or butted together to extend length of travel.

  9. AL0115-0120RCH AL0115-0120RCH 115RC 47" Aluminum Track with Pre-Drilled Holes
    DETAILS
    Each
    $82.48

    Return to 115RC Product Detail Page Corrosion-resistance + linear motion you can count on. Sold separately yet compatible with both 115RC kits (4180-0756-XE/4180-0746-XE), this 47” aluminum track includes pre-drilled holes, acting as the solid foundation for a lightweight, reliable movement solution. For further customization, aluminum tracks may be cut to a desired length or butted together to extend length of travel.

  10. 4034 Medium-Duty & Over-Travel Slide with Progressive Movement
    DETAILS
    Each
    $24.58

    Designed to give your file cabinets premium progressive movement and precise vertical adjustment, the 4034 model is ideal for lateral filing applications--fitted with steel ball bearings and a a hold-in detent to keep folders and other items secure. * Supports loads up to 150 lbs. * For drawers up to 24" wide * For additional technical information see below Guaranteeing extra-smooth movement and easy-access for deeper and heavier file cabinets in your home or commercial office, this hardware…

  11. 3732 Light-Duty, Full-Extension Slide with Low-Profile
    DETAILS
    Each
    Rating:
    0%
    $9.67

    Introducing the 3732, an extra-low-profile side-mount drawer slide. With your choice of clear zinc, black, or white finish, our 3732 model is most popular in office storage while also bringing its smooth and silent motion to box drawers in kitchens, bathrooms, and other establishments. * Supports loads up to 100 lbs. * For drawers up to 16” wide * For additional technical information see below With front face frame mounting holes and a push latch disconnect, installation, disassembly, and…

  12. 2907 Light-Duty & Low-Profile Slide with Over-Travel (Fits 1U, 2U, and 3U Chassis)
    DETAILS
    Each
    Rating:
    93%
    $95.24

    You can’t beat fantastic first-class function. The 2907 is a small yet impactful movement solution that can be found on the Tera 100 Supercomputer, the most powerful system in Europe. With its handy lock-out feature, this slide guarantees security and stability during maintenance and service for electronic enclosures. * Supports loads up to 115 lbs. * Tested chassis width at 16” * Designed for 1U-3U chassis * For additional technical information see below Offering over-travel for full wiring and…

VIEW AS:
Grid List

Items 1 - 12 of 61

per page