Items 1 - 11 of 11
Go with the Accuride Original line of motion hardware. Complete with enhanced strength and movement, full-extension, and a lever-disconnect, the 3832E model is a classic drawer slide that fits a wide range of uses including but not limited to: pull-out shelves, kitchen utensil drawers, and point-of-sales trays. * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below A patented Cam Drawer Adjust allows for precise vertical adjustment, while a…
…for our 116RC Heavy-Duty Linear Track System, this damper cushions and decelerates the last 1.6” of your hardware’s travel for reduced vibration and migration while also providing a smooth, gentle return every time. With the use of this optional damper, end stops are no longer required. However, recycling brackets (SS0166-BRKT01RC) will be needed to protect the carriages, and sliding door fixtures will require a separate bracket kit. Your hardware deserves every bit of convenience and ease.
A state-of-the-art sliding solution. With ADA-compliant linear motion and design, the 116RC model is an innovative breakthrough for the sliding door market, also accommodating large screens, panels, movable walls, barn doors, and so much more. * Supports loads up to 793 lbs. * Aluminum track in a choice of two lengths: 94.5" and 142" Purchase of the 116RC requires the following components Carriage (Min. Quantity: 1) * SS0116-CASSRC: Carriage – Stainless Steel Balls * CB0116-CASSRC: Carriage –…
Our friction disconnect puts in the extra elbow grease, so you don’t have to. Specially developed and engineered for suspended drawers beneath desks or tabletops, the 2006 model offers a standard ¾-extension and simple, fixed height bracket installation. * Supports loads up to 45 lbs. * For drawers up to 16” wide * For additional technical information see below Equipped with a more accessible than ever friction disconnect, this suspended solution remains easy to install, disassemble, and…
Mounting bracket kit for 1145 or 1155 Flipper Door Slides
Return to 116RC Product Detail Page Finishing touches for sliding door hardware. Engineered for the 116RC Door Hardware Kit, these fascia end caps stabilize the anodized aluminum fascia board on its support beam, specifically for use with track systems on sliding doors. Each order comes with two fascia end caps and eight screws for a thorough installation and robust solution.
Return to 116RC Product Detail Page Structural support for load-bearing walls. A component within the Sliding Door Hardware Kit for the 116RC Heavy-Duty Linear Track System, this support beam anchors your motion hardware securely for tried and true performance that endures the test of time.
Return to 116RC Product Detail Page Extra smooth movement and proven endurance. Specially engineered for the 116RC Sliding Door Hardware Kit, this door bracket kit helps protect your linear track system’s carriages when a damper (CB0116-DAMP) is installed to cushion a fixture’s end of travel.
Return to 116RC Product Detail Page The sum of its parts. A component within the Sliding Door Hardware Kit for the 116RC Heavy-Duty Linear Track System, this 142” fascia is crafted from anodized aluminum and clips onto its support beam (AL0116-SUPPRC) for a sleek, completed design. For extra easy-access, an installer can lift and hook the fascia open to reach the track and fittings responsible for linear motion.
Compatible with our 123 Flipper Door Slide, this inset base kit includes black 35mm clip-on hinges as well as #6, #8, and M6 Euro screws--plus pivot blocks and one “Caution” sticker.
Pilaster kit for use on 3832 and 2132 slides.
Items 1 - 11 of 11