8" Slide

VIEW AS:
Grid List

Items 1 - 12 of 24

  • 1
  • 2
per page
  1. …kit allows for bottom and side mount applications * For additional technical information see below From heavy-duty fixtures and appliances around the home to drawers and trays for gear on utility and emergency vehicles, luxury RVs, or overland trucks and trailers, our 9308E slide endures frequent use and rough terrain. Who knew a movement solution could be so steadfast? For an alternative locking slide for lighter drawers, look at the Accuride 3608 Heavy-Duty Lock-In & Lock-Out Slide.

  2. Go with the Accuride Original line of motion hardware. Complete with enhanced strength and movement, full-extension, and a lever-disconnect, the 3832E model is a classic drawer slide that fits a wide range of uses including but not limited to: pull-out shelves, kitchen utensil drawers, and point-of-sales trays. * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below A patented Cam Drawer Adjust allows for precise vertical adjustment, while a…

  3. 5410-0801-CE 16" Clip-On Bracket
    $5.44

    Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 16” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.

  4. 5410-0802-CE 18" Clip-On Bracket
    $5.44

    Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 18” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.

  5. Bottom mount + top-of-mind. Compatible with the 3135EC Eclipse Undermount solution, this bracket kit supplies the tools and instructions for installing the 3135EC for fixtures and frames that require a bottom mount technique. Including four bottom-mount brackets with a zinc finish, this kit also contains eight #8 32 + ¼" self-tapping screws and an installation guide. One RoHS-compliant kit accommodates one pair of 3135EC slides, with bulk orders also available.

  6. 5410-0800-CE 14" Clip-On Bracket
    $5.44

    Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832 3732, and 3834, this 14” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.

  7. The Self-Leveling Door Bracket lets you use the Accuride 118RC Medium-Duty Linear Track System with sliding doors. Like all innovations from Accuride, the bracket’s specialties don’t end there: A novel design keeps your door level for smooth and steady motion. You can even install this accessory in as few as three steps! (See the technical sheet under “Downloads” for more information.)

  8. The Accuride 3608 is a full-travel and locking drawer slide for stationary loads up to 275 lbs. This heavy-duty slide features lock-in and lock-out functionality to secure drawers open or closed. The 3608 also has a non-disconnect design to prevent drawers from being removed. * Configuration: Side-Mount * Max Drawer Load: 275 lbs. * Side-Space: 0.75 in. The Accuride 3608 is an ideal movement solution for storage in vehicles and toolboxes. It is also compatible with the EZ-Release Kit for quick,…

  9. High-performance with a very low profile. Offering full access to stored items with full-extension movement, the 2601 model is light-duty industrial hardware perfect for tool boxes, laboratory equipment, and commercial-grade fixtures. * Supports loads up to 75 lbs. * Tested drawer width at 16” * For additional technical information see below Because of its extra low profile, the 2601 is not available for flat mounting. However, this motion hardware includes an even 0.50” of side-space along with…

  10. The CB3620-258TV is a heavy-duty drawer slide ideal for media centers. * Supports loads up to 225 lbs. * 14"-extension * For additional technical information see below The CB3620-258TV includes hold-in detent to prevent roll-out and bounce-back.

  11. Meet our lowest profile rail mount motion hardware. Commercial-grade and residential-friendly, the 2632 model offers light-duty, comprehensive support to retail store displays and fixtures, lab equipment, wooden and metal furniture, kitchen cabinetry, as well as bathroom fixtures. * Supports loads up to 65 lbs. * For drawers up to 16” wide * For additional technical information see below The 2632 is a movement solution designed and developed with the end-user in mind--including an easy-use rail…

  12. …go with precious cargo in tow? We’ve got you covered with our enhanced 9308-E5. The 9308-E5 is a kit that includes one right-handed 9308E Heavy-Duty Lock-In & Lock-Out and one 9301E Heavy-Duty standard slide. * Supports loads up to 600 lbs. * Includes one 9308E (right-handed) and one 9301E slide * Platform bracket kit (OPTIONAL) allows for bottom and side mount applications. From heavy-duty fixtures and appliances around the home to drawers and trays for gear on utility and emergency vehicles,…

VIEW AS:
Grid List

Items 1 - 12 of 24

  • 1
  • 2
per page