Al

  • Products (18)
VIEW AS:
Grid List

Items 1 - 12 of 18

  • 1
  • 2
per page
  1. Just when you thought a movement solution couldn’t get any stronger. Offering full-extension, a little extra side-space, and an increased load capacity compared to to its AL4120 counterpart, the AL4140 model combines the same super-strength and corrosion-resistance to maximize your machinery, cabinet frames, and so much more. * Supports loads up to 1,323 lbs. * 1.5” side-space * For additional technical information see below From hardware in cellars to heavy-duty appliances, this tough-as-nails…

  2. Lightweight aluminum + stainless steel ball bearings = super-strength. Resistant to moisture, humidity, and corrosion, our AL4120 model can tackle any heavy-duty task while enduring harsh, outdoor, or moist environments. * Supports loads up to 1,212 lbs. * Tested drawer width at 24” * For additional technical information see below From woodworking projects to equipment storage and industrial use, this robust solution offers the same smooth, high-performance without adding extra weight to your…

  3. Go above-and-beyond with motion hardware. A uniquely developed tilt track system that specializes in (but is not limited to) over-the-shoulder storage, the AL4190 solution guarantees full-viewing and easy-access to stowed-away items in a variety of settings, including supply and equipment storage on vehicles, in warehouses, and inside garages. * Supports loads up to 140 lbs. * For drawers up to 40” wide * Aluminum track in lengths of 24" and 40" * For additional technical information see below *…

  4. The Accuride AL4165 is an industrial-grade and heavy-duty slide with two-way full travel. The AL4165 uses corrosion-resistant aluminum slide members and stainless-steel bearings, ensuring excellent long-term performance even in tough environments. * Supports loads up to 596 lbs. * Side-mount configuration * Two-way Travel * Corrosion-resistant materials * Full-extension design The AL4165 offers full-extension travel in both directions, while occupying only 1.04 inches of side-space. This slide…

  5. Return to 115RC Product Detail Page Corrosion-resistance + linear motion you can count on. Sold separately yet compatible with both 115RC kits (4180-0756-XE/4180-0746-XE), this 47” aluminum track acts as the solid foundation for a lightweight, reliable movement solution. For further customization, aluminum tracks may be cut to a desired length or butted together to extend length of travel. Note: these aluminum tracks do not come with pre-drilled holes.

  6. Return to 115RC Product Detail Page Corrosion-resistance + linear motion you can count on. Sold separately yet compatible with both 115RC kits (4180-0756-XE/4180-0746-XE), this 94” aluminum track acts as the solid foundation for a lightweight, reliable movement solution. For further customization, aluminum tracks may be cut to a desired length or butted together to extend length of travel. Note: these aluminum tracks do not come with pre-drilled holes.

  7. Return to 116RC Product Detail Page Corrosion-resistance + linear motion you can count on. Engineered specifically for the 116RC model, this aluminum track acts as the solid foundation for a heavy-duty yet lightweight movement solution. For further customization, aluminum tracks may be cut to a desired length or butted together to extend length of travel.

  8. Return to 116RC Product Detail Page Corrosion-resistance + linear motion you can count on. Engineered specifically for the 116RC model, this longer aluminum track acts as the solid foundation for a heavy-duty yet lightweight movement solution. For further customization, aluminum tracks may be cut to a desired length or butted together to extend length of travel.

  9. Return to 116RC Product Detail Page Ensuring ease from start to finish. Engineered specifically for the 116RC model, these aluminum end stops ensure that your linear track system ends its length of travel safely and soundly--without slamming or rattling shut. Each order comes with two end stops crafted from corrosion-resistant aluminum and two screws for a breezy installation.

  10. Return to 116RC Product Detail Page Structural support for load-bearing walls. A component within the Sliding Door Hardware Kit for the 116RC Heavy-Duty Linear Track System, this support beam anchors your motion hardware securely for tried and true performance that endures the test of time.

  11. Return to 115RC Product Detail Page Ensuring ease from start to finish. Sold separately or within either 115RC kit (4180-0756-XE/4180-0746-XE), these aluminum end stops ensure that your linear track system ends its length of travel safely and soundly--without slamming or rattling shut. Each order comes with one end stop crafted from corrosion-resistant aluminum and two screws for a breezy installation.

  12. Return to 116RC Product Detail Page The sum of its parts. A component within the Sliding Door Hardware Kit for the 116RC Heavy-Duty Linear Track System, this 142” fascia is crafted from anodized aluminum and clips onto its support beam (AL0116-SUPPRC) for a sleek, completed design. For extra easy-access, an installer can lift and hook the fascia open to reach the track and fittings responsible for linear motion.

VIEW AS:
Grid List

Items 1 - 12 of 18

  • 1
  • 2
per page