Bracket
- Products (49)
- Videos (4)
- Blog & News (2)
-
…noise, the 9301E model is the gentle giant of movement solutions--ready to boost heavy pull-out pantries, service vehicles, and even ATMs. * Supports loads up to 600 lbs. * For drawers up to 42” wide with slide lengths up to 60" * 9301E accessory bracket kits offer bottom and side mount installation options * For additional technical information see below Tested for a total of 50,000 cycles at maximum load capacity, the 9301E solution extends unfailing strength and reliability for a full breadth…
Allows users to platform-mount 9300 Series slides. Includes:* Two brackets* Four 1/4" hex-head screws and nuts * Locking washers Compatible with 9301E, 9307E, and 9308E slides,
-
…enhanced 9308-E5. The 9308-E5 is a kit that includes one right-handed 9308E Heavy-Duty Lock-In & Lock-Out and one 9301E Heavy-Duty standard slide. * Supports loads up to 600 lbs. * Includes one 9308E (right-handed) and one 9301E slide * Platform bracket kit (OPTIONAL) allows for bottom and side mount applications. From heavy-duty fixtures and appliances around the home to drawers and trays for gear on utility and emergency vehicles, luxury RVs, or overland trucks and trailers, our 9308-E5 is a…
-
…stability during maintenance and service for electronic enclosures. * Supports loads up to 115 lbs. * Tested chassis width at 16” * Designed for 1U-3U chassis * For additional technical information see below Offering over-travel for full wiring and connection access as well as adjustable mounting brackets to accommodate a wide array of depths, rail configurations, and hole styles in enclosures and racks, Model 2907 maximizes space and prioritizes ease without sacrificing solid load capacities.
Bottom mount + top-of-mind. Compatible with the 3135EC Eclipse Undermount solution, this bracket kit supplies the tools and instructions for installing the 3135EC for fixtures and frames that require a bottom mount technique. Including four bottom-mount brackets with a zinc finish, this kit also contains eight #8 32 + ¼" self-tapping screws and an installation guide. One RoHS-compliant kit accommodates one pair of 3135EC slides, with bulk orders also available.
-
…covered. Our newly enhanced 9308E solution is fit with improved lock-in/lock-out springs, ensuring your items and equipment stay safely stowed away while remaining easier to access than ever. * Supports loads up to 600 lbs. * Optional platform bracket kit allows for bottom and side mount applications * For additional technical information see below From heavy-duty fixtures and appliances around the home to drawers and trays for gear on utility and emergency vehicles, luxury RVs, or overland…
…doors, and so much more. * Supports loads up to 793 lbs. * Aluminum track in a choice of two lengths: 94.5" and 142" Purchase of the 116RC requires the following components Carriage (Min. Quantity: 1) * SS0116-CASSRC: Carriage – Stainless Steel Balls * CB0116-CASSRC: Carriage – Polymer Balls Track (Min. Quantity: 1) * AL0116-024RC: 94.5" Aluminum Track * AL0116-036RC: 141.7" Aluminum Track NOTE: Purchase of optional Aluminum End Stop (AL0116-STOPRC) requires Recycling Bracket (SS0116-BRKT01RC).
…for our 116RC Heavy-Duty Linear Track System, this damper cushions and decelerates the last 1.6” of your hardware’s travel for reduced vibration and migration while also providing a smooth, gentle return every time. With the use of this optional damper, end stops are no longer required. However, recycling brackets (SS0166-BRKT01RC) will be needed to protect the carriages, and sliding door fixtures will require a separate bracket kit. Your hardware deserves every bit of convenience and ease.
A bracket kit for flush inset drawer fronts. Compatible with our 3135EC undermount solution, this kit includes one pair of bottom inset bracket assemblies in a zinc finish, adding ease and precision to alternative frames and mounting styles. For thorough installation, a rear face frame bracket (4180-0656-XE) is also required. Along with both brackets, this single kit also comes with two each #8-32 flat head screws, and an installation guide inside a polybag. Cabinet mounting screws are not…
Inset installation made simpler! Engineered for use with our 3135EC Eclipse Undermount solution, this bracket kit assists with implementing a flush inset drawer front in need of concealed hardware. Complete with 2 RoHS-compliant inset assemblies with a zinc finish, two #8 32 flat head screws, and an installation guide--all inside a polybag--this kit is also available for bulk orders, fulfilling projects of any scale.
Return to 116RC Product Detail Page Extra protection + Quality assurance. Engineered specifically for the 116RC model, this recycling bracket protects the carriages on your linear track system when a damper (CB0116-DAMP) is installed to cushion a fixture’s end of travel. One recycling bracket is needed for each recirculating ball carriage.
Made to accompany our 3135EC, this bracket kit aids in easy-access installation for rear-facing frames and fixtures in need of concealed hardware. Including two rear brackets with a clear zinc finish, this kit also contains six #8 x ⅝” screws and an installation guide--all inside a polybag. This kit is also RoHS-compliant and available for bulk orders.
