Cabinet

VIEW AS:
Grid List

Items 1 - 12 of 23

  • 1
  • 2
per page
  1. 3634EC Medium-Duty & Over-Travel Slide with Easy-Close
    DETAILS
    Each
    $52.18

    …trays, and storage bins in a full range of settings and projects. * Supports loads up to 150 lbs. * For drawers up to 42" wide * Recommended drawer box size 1 + 9/16" less than the cabinet opening. * For additional technical information see below Not only does this over-travel solution promise a smooth and gentle close after every use, but this slide also contains silencing for quieter operation--adding a dash of heavy-duty luxury to your upscale fixtures, displays, and stow-away cabinets.

  2. 3634 Medium-Duty Over-Travel Slide
    DETAILS
    Each
    Rating:
    0%
    $41.97

    …stores. * Side-mount load capacity up to 200 lbs. per pair with drawer width of 42" * Flat mount load capacity up to 75 lbs. per pair with drawer width of 24" * Recommended drawer box size 1 + 9/16" less than the cabinet opening * For additional technical information see below With the same cabinet hole pattern as models 3832 and 3834, along with a disconnect lever, installation and removal are now more accessible than ever--saving your precious time and energy in high-production environments.

  3. 123 Pocket Door Slide
    DETAILS
    Each
    $45.84

    The Accuride 123 Pocket Door Slide is an easy-to-install movement solution for concealed cabinet doors. This slide uses a novel design for self-alignment, ensuring smooth movement. The Accuride 123 allows a door to retract within a cabinet, preserving a clean esthetic. * Supports loads up to 30 lbs. * For pocket doors up to 42” tall x 24” wide * Features self-aligning movement * Vertically or horizontally mounted * Available in black (CB) finish * Includes 35mm hinges * Backed by a Limited…

  4. 1234 Pocket Door Slide
    DETAILS
    Each
    $38.99

    The Accuride CB1234 Pocket Door Slide is an easy-to-install movement solution for concealed cabinet doors. The slide uses a novel design for self-alignment, ensuring smooth movement. The Accuride CB1234 allows a door to retract within a cabinet, preserving a clean esthetic. * Support loads up to 30 lbs. * For pocket doors up to 42” tall x 24” wide * Features self-aligning movement * Vertically or horizontally mounted * Available in black (CB) finish * Backed by a Limited Lifetime Warranty The…

  5. 3135EC Eclipse Easy-Close Undermount Slide
    DETAILS
    Each
    $32.96

    Look no further for that final touch. The 3135EC commercial-grade undermount slide refines your chic cabinet with concealed hardware, ensuring an extra-sleek appearance with smooth easy-close action. * Supports loads up to 100 lbs. * For drawers up to 30" wide * For additional technical information see below Perfect for upscale cabinetry, retail displays, and showroom fixtures, our concealed design allows for a clean look that focuses on your craftsmanship--not the hardware. With special…

  6. 4180-0605-XE 3135EC Bottom Inset Face Frame Bracket Kit
    DETAILS
    Each
    Rating:
    0%
    $4.54

    …with our 3135EC undermount solution, this kit includes one pair of bottom inset bracket assemblies in a zinc finish, adding ease and precision to alternative frames and mounting styles. For thorough installation, a rear face frame bracket (4180-0656-XE) is also required. Along with both brackets, this single kit also comes with two each #8-32 flat head screws, and an installation guide inside a polybag. Cabinet mounting screws are not included in this kit and must be purchased separately.

  7. 7950 Heavy-Duty Full Extension Non-Disconnect Slide
    DETAILS
    Each
    $59.05

    …for cookware, toolboxes, equipment storage, and so much more. * Side-mount load capacity up to 350 lbs. * Flat-mount load capacity up to 150 lbs. * For drawers up to 42” wide * For additional technical information see below Designed with a bridged ball retainer that keeps your sliding hardware in sync, the 7950 eliminates inconvenient migration common in more inferior ball bearing slides, and thus brings long-lasting endurance to metal or wooden cabinet frames in homes and workstations alike.

  8. AL4140 Super Heavy-Duty, Corrosion-Resistant & Full-Extension Aluminum Slide
    DETAILS
    Each
    $1157.04

    …get any stronger. Offering full-extension, a little extra side-space, and an increased load capacity compared to to its AL4120 counterpart, the AL4140 model combines the same super-strength and corrosion-resistance to maximize your machinery, cabinet frames, and so much more. * Supports loads up to 1,323 lbs. * 1.5” side-space * For additional technical information see below From hardware in cellars to heavy-duty appliances, this tough-as-nails yet lightweight slide is a trusty addition to…

  9. 1432 Light-Duty Slide for Tall Pocket Doors without Hinges
    DETAILS
    Each
    $60.33

    …the Accuride CB1432 slide provides smooth and silent movement for media centers, armoires, and concealed storage. The CB1432 also includes Accuride’s advanced cable system, which eliminates “racking” often found when opening or closing tall cabinet doors. * For loads up to 75 lbs. * For pocket doors up to 78” tall x 26” wide * Features advanced Anti-Rak stabilizer system * Features self-aligning movement * Vertically or horizontally mounted * Includes hold-out detent * Comes in black finish…

  10. CB1332 Light-Duty Slide for Tall Pocket Doors with Hinges
    DETAILS
    Each
    $87.66

    …the Accuride CB1332 slide provides smooth and silent movement for media centers, armoires, and concealed storage. The CB1332 also includes Accuride’s advanced cable system, which eliminates “racking” often found when opening or closing tall cabinet doors. * For loads up to 75 lbs. * For pocket doors up to 78” tall x 26” wide * Features advanced Anti-Rak stabilizer system * Features self-aligning movement * Vertically or horizontally mounted * Includes hold-out detent * Includes 35mm hinges…

  11. 4034 Medium-Duty & Over-Travel Slide with Progressive Movement
    DETAILS
    Each
    $24.58

    Designed to give your file cabinets premium progressive movement and precise vertical adjustment, the 4034 model is ideal for lateral filing applications--fitted with steel ball bearings and a a hold-in detent to keep folders and other items secure. * Supports loads up to 150 lbs. * For drawers up to 24" wide * For additional technical information see below Guaranteeing extra-smooth movement and easy-access for deeper and heavier file cabinets in your home or commercial office, this hardware…

  12. 4180-0603-XE Eclipse Toolkit
    DETAILS
    Each
    $43.91

    …levers. * ¼” Brad Point Drill Bit: This bit is designed for drilling the hook holes in the back of the drawer. If used with the Accuride Drilling Jig, no measuring is required. * ¼” Stop Collar: Used with the ¼” Brad Point Drill Bit, this sets the depth for the drawer-hook holes and prevents over-drilling. * 5/64” HSS Spring-Loaded Self-Centering Drill Bit: This component fits the wood screw holes of the Eclipse products and ensures pre-drilled holes for the cabinet member are centered properly.

VIEW AS:
Grid List

Items 1 - 12 of 23

  • 1
  • 2
per page