Your company account is blocked and you cannot place orders. If you have questions, please contact your company administrator.

Clip

VIEW AS:
Grid List

Items 1 - 12 of 17

  • 1
  • 2
per page
Related Categories 1145 | C1145 | Flipper Door | Flipper | Hinges
  1. Over the moon for overhead storage? So are we. Engineered to retract over the top of overhead storage compartments in commercial spaces or entertainment centers, the 1145 model is exclusively for horizontally mounted doors. * Supports loads up to 30 lbs. * Doors up to 36” wide * For additional technical information see below Providing minimum racking and your choice in steel or polymer bearings, the 1145 also comes with a pin hinge and lends itself to optional clip-on bracket kits for added…

  2. Compatible with models 1332 and 1432, this carrier strip kit is sold separately from D-Pack hardware kits and optimizes pocket and flipper door installation. Each kit includes two zinc hinge carrier strips, 3 stainless steel connector clips, six #8 x ⅜” black pan head screws (without hinge base plate), six #8 x ⅝” zinc flat head screws (with hinge base plate), and one “Caution” sticker.

  3. Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 22” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.

  4. Compatible with models 1332 and 1432, this carrier strip kit is sold separately from D-Pack hardware kits and optimizes pocket and flipper door installation. Each kit includes two black hinge carrier strips, 3 stainless steel connector clips, six #8 x ⅜” black pan head screws (without hinge base plate), six #8 x ⅝” zinc flat head screws (with hinge base plate), and one “Caution” sticker.

  5. Need extra connector clips for your pocket and flipper doors? We've got you covered. Working with vertically-mounted models, such as the 1332 and 1432, this kit includes an extra connector clip and installation screws for steadfast durability and convenience. Each kit includes one stainless steel connector clip, two #8 x ⅜” black electroplate pan-head screws (without hinge base plate), two #8 x ⅝” zinc flat head screws (with hinge base plate), as well as one ‘Caution’ sticker.

  6. Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832 3732, and 3834, this 14” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.

  7. Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 16” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.

  8. Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 18” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.

  9. Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 20” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.

  10. Lending a hand with overlay installation for your pocket and flipper door applications, this optional clip-on hinge kit is compatible with Accuride models 123 and 1234. Each kit includes two zinc 40mm overlay clip-on hinges, 2 base plates, four #6 screws, four #8 screws, and one “Caution” sticker.

  11. Lending a hand with inset installation for thicker pocket and flipper door applications, this optional clip-on hinge kit is compatible with Accuride models 123 and 1234. Each kit includes two zinc 40mm inset clip-on hinges, 2 base plates, four #6 screws, four #8 screws, and one “Caution” sticker.

  12. Compatible with the 3160EC Eclipse Undermount slide for drawers up to 42” wide, this drawer stabilizer kit provides strength and stability for wider drawers while also eliminating racking, side-to-side movement, and hardware failure. Comprised of two stabilizer carrier strips, the installer attaches the included connector clips and pulley bracket for a trouble-free process and extra-durable finished fixture.

Related Categories 1145 | C1145 | Flipper Door | Flipper | Hinges
VIEW AS:
Grid List

Items 1 - 12 of 17

  • 1
  • 2
per page