Face Frame

VIEW AS:
Grid List

Items 1 - 12 of 14

  • 1
  • 2
per page
  1. 3732 Light-Duty, Full-Extension Slide with Low-Profile
    DETAILS
    Rating:
    0%
    $9.67

    …in office storage while also bringing its smooth and silent motion to box drawers in kitchens, bathrooms, and other establishments. * Supports loads up to 100 lbs. * For drawers up to 16” wide * For additional technical information see below With front face frame mounting holes and a push latch disconnect, installation, disassembly, and reinsertion remain effortless. This light-duty yet robust hardware solution is also fitted with a hold-in detent to prevent drawer roll-out and bounce-back.

  2. 4180-0605-XE 3135EC Bottom Inset Face Frame Bracket Kit
    DETAILS
    Rating:
    0%
    $4.54

    …bracket kit for flush inset drawer fronts. Compatible with our 3135EC undermount solution, this kit includes one pair of bottom inset bracket assemblies in a zinc finish, adding ease and precision to alternative frames and mounting styles. For thorough installation, a rear face frame bracket (4180-0656-XE) is also required. Along with both brackets, this single kit also comes with two each #8-32 flat head screws, and an installation guide inside a polybag. Cabinet mounting screws are not…

  3. 4180-0656-XE 3135EC Slotted Rear Face Frame Bracket Kit
    DETAILS
    $6.54

    Made to accompany our 3135EC, this bracket kit aids in easy-access installation for rear-facing frames and fixtures in need of concealed hardware. Including two rear brackets with a clear zinc finish, this kit also contains six #8 x ⅝” screws and an installation guide--all inside a polybag. This kit is also RoHS-compliant and available for bulk orders.

  4. 4180-0604-XE 3135EC Inset Face Frame Bracket Kit
    DETAILS
    $7.46

    Inset installation made simpler! Engineered for use with our 3135EC Eclipse Undermount solution, this bracket kit assists with implementing a flush inset drawer front in need of concealed hardware. Complete with 2 RoHS-compliant inset assemblies with a zinc finish, two #8 32 flat head screws, and an installation guide--all inside a polybag--this kit is also available for bulk orders, fulfilling projects of any scale.

  5. 4180-0568-XE Eclipse Drill Jig
    DETAILS
    $69.26

    Precision and ease collide with our Eclipse Jig! Compatible with our 3135EC undermount solution, the Eclipse Drill Jig lends an extra hand for seamless installation, aiding in lever-disconnect assemblies, drawer hooks, front face frame holes, and front side mounts (37mm). For optimal ease and outcomes, we recommend also using the 3/32” Drill Bit (in the optional Eclipse Tool Kit) to control drill depth when drilling.

  6. CB3832E Light-Duty Full-Extension Slide with Lever-Disconnect and Black Finish
    DETAILS
    $12.25

    …including but not limited to: pull-out shelves, kitchen utensil drawers, and point-of-sales trays. * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below A patented Cam Drawer Adjust allows for precise vertical adjustment, while a new face frame hole provides easy access to mounting. With a hold-in detent that prevents roll-out and bounce-back and silenced operation, the 3832E sets a new status quo for high-performance movement solutions.

  7. EW3832E Light-Duty Full-Extension Slide with Lever-Disconnect and White Finish
    DETAILS
    $13.33

    …including but not limited to: pull-out shelves, kitchen utensil drawers, and point-of-sales trays. * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below A patented Cam Drawer Adjust allows for precise vertical adjustment, while a new face frame hole provides easy access to mounting. With a hold-in detent that prevents roll-out and bounce-back and silenced operation, the 3832E sets a new status quo for high-performance movement solutions.

  8. 3832E Light-Duty & Full-Extension Slide with Lever-Disconnect
    DETAILS
    Rating:
    0%
    $10.73

    …kitchen utensil drawers, and point-of-sales trays. * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below A patented Cam Drawer Adjust allows for precise vertical adjustment, while a new face frame hole provides easy access to mounting. With a hold-in detent that prevents roll-out and bounce-back and silenced operation, the 3832E sets a new status quo for high-performance movement solutions. 3832E is also BHMA & AWI certified for…

  9. A face frame kit for use on the 3832E.

  10. A bracket kit for allowing the 2132 to be mounted into face frame cabinets.

  11. A pair of rear brackets for adapting the 3800 series of slides into fame frame cabinetry. Compatible models include: * 3832E * 3832EDO * 3832ESC * 3832EHDSC * 3834E * 3834ESC

  12. Rear bracket for face frame installation, compatible with 3832EC

VIEW AS:
Grid List

Items 1 - 12 of 14

  • 1
  • 2
per page