- Products (20)
- Videos (2)
Items 1 - 12 of 20
…hardware in homes, micro-living spaces, and industrial locations. * Side-mount load capacity up to 350 lbs. * Flat-mount load capacity up to 150 lbs. * For drawers up to 42" wide * For additional technical information see below With versatile mounting options and a handed lever disconnect for easy disassembly and reinsertion, this heavy-duty solution lends itself to a full range of uses that require unfailing movement and extra-strength. Model 7957 is also BHMA & AWI certified for…
…movement, the 2601 model is light-duty industrial hardware perfect for tool boxes, laboratory equipment, and commercial-grade fixtures. * Supports loads up to 75 lbs. * Tested drawer width at 16” * For additional technical information see below Because of its extra low profile, the 2601 is not available for flat mounting. However, this motion hardware includes an even 0.50” of side-space along with a hold-in detent that forestalls drawer roll-out and bounce-back for a perfect close every time.
…giant of movement solutions--ready to boost heavy pull-out pantries, service vehicles, and even ATMs. * Supports loads up to 600 lbs. * For drawers up to 42” wide with slide lengths up to 60" * 9301E accessory bracket kits offer bottom and side mount installation options * For additional technical information see below Tested for a total of 50,000 cycles at maximum load capacity, the 9301E solution extends unfailing strength and reliability for a full breadth of heavy-duty storage needs, setting…
…designed to enhance wider drawers, shelves, and storage bins that require full access–from household kitchens to business or medical offices, and even retail stores. * Side-mount load capacity up to 200 lbs. per pair with drawer width of 42" * Flat mount load capacity up to 75 lbs. per pair with drawer width of 24" * Recommended drawer box size 1 + 9/16" less than the cabinet opening * For additional technical information see below With the same cabinet hole pattern as models 3832 and 3834,…
Extra-strength meets versatility. Uniquely engineered for drawers and shelves up to 42" wide, our 7950 Heavy-Duty Full-Extension Slide can be side- or flat-mounted in hardware and fixtures for cookware, toolboxes, equipment storage, and so much more. * Side-mount load capacity up to 350 lbs. * Flat-mount load capacity up to 150 lbs. * For drawers up to 42” wide * For additional technical information see below Designed with a bridged ball retainer that keeps your sliding hardware in sync, the…
…smooth and consistent linear movement, the 115 model is a versatile solution that provides support, guidance, or adjustment in a wide array of industrial fixtures and machines. * Supports loads up to 132 lbs. * For drawers up to 43” wide * For additional technical information see below Tested at 10,000 cycles per pair to guarantee unerring strength and endurance, the 115 linear motion slide remains flexible to specific and unique designs with flat-, side-, and vertical-mounting capabilities.
…again. Multifaceted in function, the 3640A solution enhances any commercial and residential office, while also remaining a go-to option for lateral filing and extra-wide drawers in various settings. * Side mount load capacity up to 200 lbs. per pair with drawer width of 42" * Flat mount load capacity up to 75 lbs. per pair with drawer width of 24" * For additional technical information see below On top of its trusty over-travel, this versatile hardware is also fitted with a hold-in detent to…
Seamless movement paired with infinite possibilities. The endlessly versatile 115RC Linear Track System contains lightweight, corrosion-resistant tracks that can be side, flat, or vertically mounted—offering reliable guidance to movable walls, sliding racks, screens, panels, partitions, and even assembly lines. * Supports loads up to 265 lbs. * Aluminum tracks available in two lengths: 47" and 94,” with or without pre-drilled holes Purchase of the 115RC requires the following components:…
…with our 3135EC undermount solution, this kit includes one pair of bottom inset bracket assemblies in a zinc finish, adding ease and precision to alternative frames and mounting styles. For thorough installation, a rear face frame bracket (4180-0656-XE) is also required. Along with both brackets, this single kit also comes with two each #8-32 flat head screws, and an installation guide inside a polybag. Cabinet mounting screws are not included in this kit and must be purchased separately.
- SS0115-CASSRC SS0115-CASSRC 115RC Cassette with Stainless Steel Bearings$45.00
Return to 115RC Product Detail Page Sold as a single component or within a 115RC kit (4180-0746-XE), this cassette model is crafted with stainless steel ball bearings for added strength, providing unerring endurance to your design’s overall function. Easy-to-install and available for flat- or side-mounting, this stainless steel ball bearing carriage adds seamless, smooth motion to your aluminum track hardware.
A state-of-the-art sliding solution. With ADA-compliant linear motion and design, the 116RC model is an innovative breakthrough for the sliding door market, also accommodating large screens, panels, movable walls, barn doors, and so much more. * Supports loads up to 793 lbs. * Aluminum track in a choice of two lengths: 94.5" and 142" Purchase of the 116RC requires the following components Carriage (Min. Quantity: 1) * SS0116-CASSRC: Carriage – Stainless Steel Balls * CB0116-CASSRC: Carriage –…
- CB0116-CASSRC CB0116-CASSRC 116RC Cassette with Polymer Bearings$192.48
Return to 116RC Product Detail Page Extra Quiet + Renowned Quality. Sold as a single, extra component or within the 116RC kit, this cassette provides flawless, linear motion to aluminum track systems with the use of polymer bearings that guarantee silenced operation. Easy-to-install and available for flat- or side-mounting, this polymer ball bearing carriage adds smooth and reliable motion to your hardware of choice.
Items 1 - 12 of 20