Hardware

VIEW AS:
Grid List

Items 1 - 12 of 109

per page
  1. 4180-0756-XE 115RC Hardware Kit with Polymer Ball Carriages
    DETAILS
    Each
    $150.14

    Everything you need for effortless linear motion. A complete kit for an easy yet thorough set-up, this 115RC kit includes the following: two polymer ball carriages (CB0115-CASSRC), 2 end stops (AL0115-STOPRC), four M5 ⅝” barrel nuts, and four star washers.

  2. 3832EC Easy-Close Light-Duty & Side-Mount Full-Extension Slide w/ Lever-Disconnect
    DETAILS
    Each
    Rating:
    100%
    $19.95

    …Add a bit of much-needed ease to hardware in the home, industrial workspaces, or institutional equipment. * Supports loads up to 100 lbs. * For drawers up to 16” wide * For additional technical information see below Engineered with the end-user in mind, the 3832EC’s Easy-Close mechanism remains partially shielded to prevent small debris particles from interfering with operation, optimizing it for long-term, maintenance-free use. This specialty motion hardware ensures that the drawer doesn’t pull…

  3. 4180-0746-XE 115RC Hardware Kit with Stainless Steel Ball Carriages
    DETAILS
    Each
    $150.14

    Everything you need for effortless linear motion. A complete kit for an easy yet thorough set-up, this 115RC kit includes the following: two stainless steel ball carriages (SS0115-CASSRC), 2 end stops (AL0115-STOPRC), four M5 ⅝” barrel nuts, and four star washers.

  4. 2990-9777-BE CBLIFT-0019 VESA Fixed Bracket Kit
    DETAILS
    Each
    $36.86

    Compatible with the CBLIFT-0019 Ascent, this bracket kit provides the means to attach a flat panel screen to your motion hardware (fasteners included)

  5. 2990-9776-BE CBLIFT-0019 VESA Tilt Bracket Kit
    DETAILS
    Each
    $57.14

    Compatible with the CBLIFT-0019 Ascent, this bracket kit provides the means to attach a flat panel screen to your motion hardware (fasteners included)

  6. AL0116-SUPPRC AL0116-SUPPRC 116RC Support Beam
    DETAILS
    Each
    $556.57

    Return to 116RC Product Detail Page Structural support for load-bearing walls. A component within the Sliding Door Hardware Kit for the 116RC Heavy-Duty Linear Track System, this support beam anchors your motion hardware securely for tried and true performance that endures the test of time.

  7. 4180-0757-XE 115RC Nuts and Washers for Individual Carriages
    DETAILS
    Each
    $6.31

    Renowned hardware + The tools you need. Available as an optional accessory for the 115RC Linear Track System, these nuts and washers aid in the installation of any additional carriages your hardware needs. Each order includes two M5 ⅝” barrel nuts and two star washers.

  8. AL0116-ECAPRC-2 AL0116-ECAPRC-2 116RC Fascia End Caps
    DETAILS
    Each
    $57.09

    Return to 116RC Product Detail Page Finishing touches for sliding door hardware. Engineered for the 116RC Door Hardware Kit, these fascia end caps stabilize the anodized aluminum fascia board on its support beam, specifically for use with track systems on sliding doors. Each order comes with two fascia end caps and eight screws for a thorough installation and robust solution.

  9. CB0116-DAMP 116RC Damper
    DETAILS
    Each
    $140.31

    hardware with a soft side. An optional component for our 116RC Heavy-Duty Linear Track System, this damper cushions and decelerates the last 1.6” of your hardware’s travel for reduced vibration and migration while also providing a smooth, gentle return every time. With the use of this optional damper, end stops are no longer required. However, recycling brackets (SS0166-BRKT01RC) will be needed to protect the carriages, and sliding door fixtures will require a separate bracket kit. Your hardware

  10. SS2028 Light-Duty 3/4-Extension and Corrosion-Resistant Slide
    DETAILS
    Each
    Rating:
    0%
    $89.64

    Stainless steel hardware with a narrow profile. With a corrosion-resistant coating, the SS2028 model is perfect for fixtures that need to withstand moisture or high levels of humidity--including but not limited to industrial machines, outdoor hardware, and commercial or residential kitchens. * Supports loads up to 100 lbs. * For drawers up to 18” wide * For additional technical information see below Non-disconnect for added safety, the SS2028 also includes a standard ¾-extension and a hold-in…

  11. C204A-LR Medium-Duty 3/4-Extension Slide with Lock-Out and Latch-Disconnect
    DETAILS
    Each
    $65.64

    Medium-duty motion hardware on-the-go. Equipped with a standard ¾-extension and a convenient front latch disconnect, the 204A-LR model also includes our handy lock-out feature, making it go-to motion hardware for mobile fixtures, medical carts, pharmaceutical trays, and high-production, industrial equipment or storage. * Supports loads up to 140 lbs. * Tested drawer width at 16” * For additional technical information see below Because of its lock-out capability, the 204A-LR ensures safe and easy…

  12. FG115-CASSAA FG115-CASSAA Auto-Adjust Carriage
    DETAILS
    Each
    $34.99

    …guidance to your industrial hardware. Crafted from advanced technical polymer, this auto-adjust carriage attaches to FG115 aluminum rails, offering constant preload force that will endure these conditions (and harsh environments) throughout the lifespan of its intended application. With the use of included plastic pins, tension between the rail and carriage remains preset. Furthermore, the carriage's internal springs create constant and consistent tension between the hardware's core elements.

VIEW AS:
Grid List

Items 1 - 12 of 109

per page