Installation

VIEW AS:
Grid List

Items 1 - 12 of 68

per page
  1. 3732 Light-Duty, Full-Extension Slide with Low-Profile
    DETAILS
    Each
    Rating:
    0%
    $9.67

    …in office storage while also bringing its smooth and silent motion to box drawers in kitchens, bathrooms, and other establishments. * Supports loads up to 100 lbs. * For drawers up to 16” wide * For additional technical information see below With front face frame mounting holes and a push latch disconnect, installation, disassembly, and reinsertion remain effortless. This light-duty yet robust hardware solution is also fitted with a hold-in detent to prevent drawer roll-out and bounce-back.

  2. 9301E Heavy-Duty & Full Extension Drawer Slide (Non-Disconnect)
    DETAILS
    Each
    Rating:
    0%
    $66.79

    …movement solutions--ready to boost heavy pull-out pantries, service vehicles, and even ATMs. * Supports loads up to 600 lbs. * For drawers up to 42” wide with slide lengths up to 60" * 9301E accessory bracket kits offer bottom and side mount installation options * For additional technical information see below Tested for a total of 50,000 cycles at maximum load capacity, the 9301E solution extends unfailing strength and reliability for a full breadth of heavy-duty storage needs, setting a high…

  3. 3832EDO Light-Duty Full-Extension Slide with Detent-Out and Lever-Disconnect
    DETAILS
    Each
    $15.96

    …while also designed with a hold-out detent to keep pull-out surfaces and drawers solidly positioned. * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below Backed by AWI & BHMA certification, this motion hardware is a beautiful addition to kitchens, workspaces, and retail stores. With easy access to mounting holes along with a lever-disconnect, installation and reinsertion of the 3832EDO slide remains labor-saving and cost-effective.

  4. 9328E Heavy-Duty Full-Extension Slide with Pocket and Bayonet Lock-In and Lock-Out
    DETAILS
    Each
    $100.70

    Enhanced movement and extended access. Designed for pocket & bayonet mounting in metal hardware and fixtures, the 9328E enables tool-less installation that’s labor-saving and cost-effective for equipment drawers or trays in various large vehicles intended for emergency, utility, hazmat, or recreational use. * Supports loads up to 360 lbs. * Tested drawer width up to 32” * For additional technical information see below Fit with an enhanced lock-in and lock-out designed for added reliability, the…

  5. 3634 Medium-Duty Over-Travel Slide
    DETAILS
    Each
    Rating:
    0%
    $44.29

    …stores. * Side-mount load capacity up to 200 lbs. per pair with drawer width of 42" * Flat mount load capacity up to 75 lbs. per pair with drawer width of 24" * Recommended drawer box size 1 + 9/16" less than the cabinet opening * For additional technical information see below With the same cabinet hole pattern as models 3832 and 3834, along with a disconnect lever, installation and removal are now more accessible than ever--saving your precious time and energy in high-production environments.

  6. 7434 Light-Duty Over-Travel Slide with Rail-Mounting and Progressive Movement
    DETAILS
    Each
    $21.86

    …enhances access to file, desk, and storage drawers around the home, office, or workspace. * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below Designed with a patented Cam Drawer Adjust, installation remains easy yet exact, while a hold-in detent for the finished design makes for long-term, practical use. The AWI & BHMA certified 7434 model also includes a trusty rail mount disconnect along with over-travel to ensure end users have…

  7. 4180-0656-XE 3135EC Slotted Rear Face Frame Bracket Kit
    DETAILS
    Each
    $6.54

    Made to accompany our 3135EC, this bracket kit aids in easy-access installation for rear-facing frames and fixtures in need of concealed hardware. Including two rear brackets with a clear zinc finish, this kit also contains six #8 x ⅝” screws and an installation guide--all inside a polybag. This kit is also RoHS-compliant and available for bulk orders.

  8. 3832EHDSC Light-Duty Full-Extension Slide with Heavy-Duty Self-Close
    DETAILS
    Each
    $16.03

    Using a greater stay-closed action than the standard 3832ESC, the 3832EHDSC model has been enhanced to accommodate productivity powerhouses--including upscale commercial, mobile, and institutional spaces. * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below Including silenced operation and easy-installation, this self-closing movement solution offers ultra-convenience as well as seamless professionalism to mobile carts, home cabinets,…

  9. 4180-0747-XE Eclipse Lever Disconnects
    DETAILS
    Each
    $11.17

    …of our commercial-grade undermount solutions, the Eclipse Lever Disconnect adds this resilient feature to your choice between the 3135EC and 3160EC (for wider drawers). Used with the handy drill extension in our optional Eclipse Tool Kit, installation is made extra-quick and hassle-free. Even with already smooth and seamless motion hardware such as the 3135EC and 3160EC, a lever disconnect gives your fixtures an extra boost of convenience for spaces that will benefit from painless disassembly…

  10. SS5322 Heavy-Duty Over-Travel and Corrosion-Resistant Slide with Bracket Disconnect
    DETAILS
    Each
    $242.04

    Stainless steel hardware with an easy-going side. Specially engineered with corrosion-resistant stainless steel and easy-install, L-shaped brackets with locator pins for a seamless disconnect, the SS5322 is the ideal solution for fixtures in commercial kitchens and industrial or outdoor cabinetry exposed to the elements. * Supports loads up to 265 lbs. * For drawers up to 18” wide * For additional technical information see below Equipped with a handy hold-in detent that eliminates any chance of…

  11. 5410-0804-CE 22" Clip-On Bracket
    DETAILS
    Each
    $4.34

    Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 22” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.

  12. 4180-0604-XE 3135EC Inset Face Frame Bracket Kit
    DETAILS
    Each
    $7.46

    Inset installation made simpler! Engineered for use with our 3135EC Eclipse Undermount solution, this bracket kit assists with implementing a flush inset drawer front in need of concealed hardware. Complete with 2 RoHS-compliant inset assemblies with a zinc finish, two #8 32 flat head screws, and an installation guide--all inside a polybag--this kit is also available for bulk orders, fulfilling projects of any scale.

VIEW AS:
Grid List

Items 1 - 12 of 68

per page