Installation

VIEW AS:
Grid List

Items 37 - 48 of 68

per page
  1. 5410-0803-CE 20" Clip-On Bracket
    DETAILS
    Each
    $4.34

    Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 20” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.

  2. C322 Light-Duty Slide with Over-Travel and Quick-Mounting Tabs
    DETAILS
    Each
    $44.27

    Easy-install for access to hard-to-reach items. Designed with bent-down tabs for a quick, seamless installation, the 322 model is an over-travel solution for trays, shelves, and drawers in kitchens and homes, as well as casework and commercial-grade fixtures. * Supports loads up to 100 lbs. * For drawers up to 16” wide * For additional technical information see below With the added benefit of silenced operation, the 322 is also ideal for pull-out surfaces in a variety of settings and workspaces,…

  3. 4180-0568-XE Eclipse Drill Jig
    DETAILS
    Each
    $69.26

    Precision and ease collide with our Eclipse Jig! Compatible with our 3135EC undermount solution, the Eclipse Drill Jig lends an extra hand for seamless installation, aiding in lever-disconnect assemblies, drawer hooks, front face frame holes, and front side mounts (37mm). For optimal ease and outcomes, we recommend also using the 3/32” Drill Bit (in the optional Eclipse Tool Kit) to control drill depth when drilling.

  4. 4180-0408-XE Black Hinge Carrier Strip Kit
    DETAILS
    Each
    $23.43

    Compatible with models 1332 and 1432, this carrier strip kit is sold separately from D-Pack hardware kits and optimizes pocket and flipper door installation. Each kit includes two black hinge carrier strips, 3 stainless steel connector clips, six #8 x ⅜” black pan head screws (without hinge base plate), six #8 x ⅝” zinc flat head screws (with hinge base plate), and one “Caution” sticker.

  5. 4180-0410-XE Zinc Hinge Carrier Strip Kit
    DETAILS
    Each
    $23.43

    Compatible with models 1332 and 1432, this carrier strip kit is sold separately from D-Pack hardware kits and optimizes pocket and flipper door installation. Each kit includes two zinc hinge carrier strips, 3 stainless steel connector clips, six #8 x ⅜” black pan head screws (without hinge base plate), six #8 x ⅝” zinc flat head screws (with hinge base plate), and one “Caution” sticker.

  6. 4180-0394-XE 40mm Hinge Kit for Inset Doors
    DETAILS
    Each
    $34.23

    Compatible with our 1432 solution and accommodating pocket doors 15/16” to 1 + ¼” thick, this hinge kit provides the extra tools you need for an inset installation. Each order includes two 40mm salice zinc clip-on hinges, two 3mm mounting base plates, two 3mm hinge base spacers, two silver hinge arm cover caps, four #6 x ⅝” zinc flat head screws, and one “Caution” door sticker.

  7. 4180-0650-XE CBLIFT-050 Fixed Lid Bracket
    DETAILS
    Each
    $183.51

    Quick-install + Quick lift. This additional kit provides a fixed lid bracket compatible with our CBLIFT-050 model for concealing flat screens in your wood cabinetry.

  8. CB1321 Pro Pocket Slide for Pocket and Flipper Doors – w/ Auto-Open
    DETAILS
    Each
    Rating:
    0%
    $71.89

    …your pocket doors are extended fully before closing. * Supports loads up to 30 lbs. * For pocket doors up to 24" wide x 42" tall * Works with either flipper (horizontal) or pocket (vertical) doors * For additional technical information, see below The 1321 is ideal for home and office cabinets as well as built-in storage casework, this pocket door slide assures quick and hassle-free installation. Additionally, the 1321’s design eliminates scuff- and scrape-causing impacts on your pocket doors.

  9. CB0116-CASSRC CB0116-CASSRC 116RC Cassette with Polymer Bearings
    DETAILS
    Each
    Rating:
    0%
    $192.48

    Return to 116RC Product Detail Page Extra Quiet + Renowned Quality. Sold as a single, extra component or within the 116RC kit, this cassette provides flawless, linear motion to aluminum track systems with the use of polymer bearings that guarantee silenced operation. Easy-to-install and available for flat- or side-mounting, this polymer ball bearing carriage adds smooth and reliable motion to your hardware of choice.

  10. SS0115-CASSRC SS0115-CASSRC 115RC Cassette with Stainless Steel Bearings
    DETAILS
    Each
    $45.00

    Return to 115RC Product Detail Page Sold as a single component or within a 115RC kit (4180-0746-XE), this cassette model is crafted with stainless steel ball bearings for added strength, providing unerring endurance to your design’s overall function. Easy-to-install and available for flat- or side-mounting, this stainless steel ball bearing carriage adds seamless, smooth motion to your aluminum track hardware.

  11. SS0116-CASSRC SS0116-CASSRC 116RC Cassette with Stainless Steel Bearings
    DETAILS
    Each
    $192.48

    Return to 116RC Product Detail Report Available as a single component or within a kit for our 116RC Linear Track System, this cassette model is crafted with stainless steel ball bearings for added strength, providing unerring endurance to your design’s overall function. Easy-to-install and available for flat- or side-mounting, this stainless steel ball bearing carriage adds heavy-duty seamless, smooth motion to your aluminum track hardware.

  12. CB0115-CASSRC CB0115-CASSRC 115RC Cassette with Polymer Bearings
    DETAILS
    Each
    $45.00

    Return to 115RC Product Detail Page Extra Quiet + The Same High Quality. Sold as a single component or within a 115RC kit (4180-0756-XE), this cassette provides flawless, linear motion to aluminum track systems with the use of polymer bearings that guarantee silenced operation. Easy-to-install and available for flat- or side-mounting, this polymer ball bearing carriage adds effortless and reliable motion to your hardware of choice.

VIEW AS:
Grid List

Items 37 - 48 of 68

per page