Items 1 - 12 of 21
…in office storage while also bringing its smooth and silent motion to box drawers in kitchens, bathrooms, and other establishments. * Supports loads up to 100 lbs. * For drawers up to 16” wide * For additional technical information see below With front face frame mounting holes and a push latch disconnect, installation, disassembly, and reinsertion remain effortless. This light-duty yet robust hardware solution is also fitted with a hold-in detent to prevent drawer roll-out and bounce-back.
…movement solutions--ready to boost heavy pull-out pantries, service vehicles, and even ATMs. * Supports loads up to 600 lbs. * For drawers up to 42” wide with slide lengths up to 60" * 9301E accessory bracket kits offer bottom and side mount installation options * For additional technical information see below Tested for a total of 50,000 cycles at maximum load capacity, the 9301E solution extends unfailing strength and reliability for a full breadth of heavy-duty storage needs, setting a high…
Enhanced movement and extended access. Designed for pocket & bayonet mounting in metal hardware and fixtures, the 9328E enables tool-less installation that’s labor-saving and cost-effective for equipment drawers or trays in various large vehicles intended for emergency, utility, hazmat, or recreational use. * Supports loads up to 360 lbs. * Tested drawer width up to 32” * For additional technical information see below Fit with an enhanced lock-in and lock-out designed for added reliability, the…
…enhances access to file, desk, and storage drawers around the home, office, or workspace. * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below Designed with a patented Cam Drawer Adjust, installation remains easy yet exact, while a hold-in detent for the finished design makes for long-term, practical use. The AWI & BHMA certified 7434 model also includes a trusty rail mount disconnect along with over-travel to ensure end users have…
…while also designed with a hold-out detent to keep pull-out surfaces and drawers solidly positioned. * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below Backed by AWI & BHMA certification, this motion hardware is a beautiful addition to kitchens, workspaces, and retail stores. With easy access to mounting holes along with a lever-disconnect, installation and reinsertion of the 3832EDO slide remains labor-saving and cost-effective.
…your go-to motion hardware for light-duty box drawers in kitchen cabinetry, desks, office furniture, and workspace fixtures. * Supports loads up to 50 lbs. * For drawers up to 12” * For additional technical information see below Simplified installation for maximum up-time in the form of a rail mount/disconnect, the 2037 solution also includes a Cam drawer adjust for precise vertical positioning. This slide promises smoother movement for smaller drawers and trays in your specially crafted…
Also known as the Box Drawer Slide. Specially crafted with a pocket & bayonet mount, providing tool-less installation that saves time and energy, the 2120 model is a light-duty champion for small metal pods, office supply storage, and other fixtures in need of standard, ¾-extension access. * Supports loads up to 75 lbs. * Tested drawer width at 16” * For additional technical information see below Equipped with a lever disconnect that simplifies disassembly and reinsertion, the 2120 also boasts a…
…a convenient lock-out to hold chassis open for extended periods. * Supports loads up to 200 lbs. * Tested chassis width at 16” * For additional technical information see below Including guide pins that provide stability and cable management that allows for direct attachment to motion hardware, the 3507 is also engineered with our One Motion Insertion that simplifies installation and reassembly of heavier loads and chassis. Increase your efficiency and up-time with this action-packed solution.
…stores. * Side-mount load capacity up to 200 lbs. per pair with drawer width of 42" * Flat mount load capacity up to 75 lbs. per pair with drawer width of 24" * Recommended drawer box size 1 + 9/16" less than the cabinet opening * For additional technical information see below With the same cabinet hole pattern as models 3832 and 3834, along with a disconnect lever, installation and removal are now more accessible than ever--saving your precious time and energy in high-production environments.
…the extra elbow grease, so you don’t have to. Specially developed and engineered for suspended drawers beneath desks or tabletops, the 2006 model offers a standard ¾-extension and simple, fixed height bracket installation. * Supports loads up to 45 lbs. * For drawers up to 16” wide * For additional technical information see below Equipped with a more accessible than ever friction disconnect, this suspended solution remains easy to install, disassemble, and reinsert into your workspace hardware.
Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 20” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.
Easy-install for access to hard-to-reach items. Designed with bent-down tabs for a quick, seamless installation, the 322 model is an over-travel solution for trays, shelves, and drawers in kitchens and homes, as well as casework and commercial-grade fixtures. * Supports loads up to 100 lbs. * For drawers up to 16” wide * For additional technical information see below With the added benefit of silenced operation, the 322 is also ideal for pull-out surfaces in a variety of settings and workspaces,…
Items 1 - 12 of 21