Linear Motion

VIEW AS:
Grid List

Items 1 - 12 of 23

  • 1
  • 2
per page
  1. A state-of-the-art sliding solution. With ADA-compliant linear motion and design, the 116RC model is an innovative breakthrough for the sliding door market, also accommodating large screens, panels, movable walls, barn doors, and so much more. * Supports loads up to 793 lbs. * Aluminum track in a choice of two lengths: 94.5" and 142" Purchase of the 116RC requires the following components Carriage (Min. Quantity: 1) * SS0116-CASSRC: Carriage – Stainless Steel Balls * CB0116-CASSRC: Carriage –…

  2. A bold yet versatile movement solution, the FG115 uses a self-lubricating carriage and rail to bring motion to your designs—rather than ball bearings in traditional slides and linear track systems. With multiple adjust options (Auto, Non, and Manual) as well as corrosion-resistant aluminum, this friction guide can handle any task and endure the harshest environments. * Supports loads up to 4,000N (900 lbf.) * Aluminum track available in two lengths: 1 meter or 2 meters. * For additional…

  3. Return to 116RC Product Detail Page Extra Quiet + Renowned Quality. Sold as a single, extra component or within the 116RC kit, this cassette provides flawless, linear motion to aluminum track systems with the use of polymer bearings that guarantee silenced operation. Easy-to-install and available for flat- or side-mounting, this polymer ball bearing carriage adds smooth and reliable motion to your hardware of choice.

  4. Return to 115RC Product Detail Page Corrosion-resistance + linear motion you can count on. Sold separately yet compatible with both 115RC kits (4180-0756-XE/4180-0746-XE), this 94” aluminum track includes pre-drilled holes, acting as the solid foundation for a lightweight, reliable movement solution. For further customization, aluminum tracks may be cut to a desired length or butted together to extend length of travel.

  5. Return to 115RC Product Detail Page Extra Quiet + The Same High Quality. Sold as a single component or within a 115RC kit (4180-0756-XE), this cassette provides flawless, linear motion to aluminum track systems with the use of polymer bearings that guarantee silenced operation. Easy-to-install and available for flat- or side-mounting, this polymer ball bearing carriage adds effortless and reliable motion to your hardware of choice.

  6. …that synchronizes the elements of the slide to produce smooth and consistent linear movement, the 115 model is a versatile solution that provides support, guidance, or adjustment in a wide array of industrial fixtures and machines. * Supports loads up to 132 lbs. * For additional technical information see below Tested at 10,000 cycles per pair to guarantee unerring strength and endurance, the 115 linear motion slide remains flexible to specific and unique designs with flat-, side-, and…

  7. Return to 115RC Product Detail Page Corrosion-resistance + linear motion you can count on. Sold separately yet compatible with both 115RC kits (4180-0756-XE/4180-0746-XE), this 94” aluminum track acts as the solid foundation for a lightweight, reliable movement solution. For further customization, aluminum tracks may be cut to a desired length or butted together to extend length of travel. Note: these aluminum tracks do not come with pre-drilled holes.

  8. Return to FG115 Product Detail Page True blue linear motion and friction. Boasting a low-maintenance and cost-effective design with advanced technical polymer, this non-adjust carriage supplies quiet, seamless movement to machinery and other industrial fixtures in need of unerring, repetitive performance. Because the tension between this carriage and an FG115 aluminum rail can't be adjusted, this free floating component is actually ideal for correcting any potential misalignments within a…

  9. Everything you need for effortless linear motion. A complete kit for an easy yet thorough set-up, this 115RC kit includes the following: two polymer ball carriages (CB0115-CASSRC), 2 end stops (AL0115-STOPRC), four M5 ⅝” barrel nuts, and four star washers.

  10. Return to 115RC Product Detail Page Corrosion-resistance + linear motion you can count on. Sold separately yet compatible with both 115RC kits (4180-0756-XE/4180-0746-XE), this 47” aluminum track includes pre-drilled holes, acting as the solid foundation for a lightweight, reliable movement solution. For further customization, aluminum tracks may be cut to a desired length or butted together to extend length of travel.

  11. Return to 116RC Product Detail Page Corrosion-resistance + linear motion you can count on. Engineered specifically for the 116RC model, this aluminum track acts as the solid foundation for a heavy-duty yet lightweight movement solution. For further customization, aluminum tracks may be cut to a desired length or butted together to extend length of travel.

  12. Return to 116RC Product Detail Page Corrosion-resistance + linear motion you can count on. Engineered specifically for the 116RC model, this longer aluminum track acts as the solid foundation for a heavy-duty yet lightweight movement solution. For further customization, aluminum tracks may be cut to a desired length or butted together to extend length of travel.

VIEW AS:
Grid List

Items 1 - 12 of 23

  • 1
  • 2
per page