Mounting Bracket

VIEW AS:
Grid List

Items 13 - 24 of 37

per page
  1. 4180-0326-XE Mounting bracket kit for 1145 Flipper door
    DETAILS
    Each
    $9.97

    Mounting bracket kit for 1145 or 1155 Flipper Door Slides

  2. 2109 Light-Duty Slide with Lever-Disconnect for Suspended Mounting
    DETAILS
    Each
    $18.96

    No need to suspend your disbelief for this motion hardware. Equipped with a lever-disconnect and variable height mounting brackets, the 2109 model is perfect for light-duty cabinetry, keyboard trays, and pencil drawers. * Supports loads up to 75 lbs. * For drawers up to 16” wide * For additional technical information see below Backed by BHMA and AWI certification, this savvy solution provides a cushion of suspension to your hardware, matched with the practicality of a hold-in and hold-out detent…

  3. 4180-0605-XE 3135EC Bottom Inset Face Frame Bracket Kit
    DETAILS
    Each
    Rating:
    0%
    $4.54

    A bracket kit for flush inset drawer fronts. Compatible with our 3135EC undermount solution, this kit includes one pair of bottom inset bracket assemblies in a zinc finish, adding ease and precision to alternative frames and mounting styles. For thorough installation, a rear face frame bracket (4180-0656-XE) is also required. Along with both brackets, this single kit also comes with two each #8-32 flat head screws, and an installation guide inside a polybag. Cabinet mounting screws are not…

  4. CBERGO-TRAY 200 CBERGO-Tray200 Ergonomic Keyboard Tray
    DETAILS
    Each
    $164.03

    …with a removable palm rest and mouse pad, the CBERGO-Tray 200 is a fantastic addition to any computer workstation. * ¾-extension * Unit width at 29.6” * For additional technical information see below Complete with adjustable mounting brackets that allow you to mount the keyboard tray inboard or outboard, installation is made simple yet versatile, and slides remain entirely concealed in the finished design. If that's not enough, the hold-in and hold-out detents keep your keyboard tray solidly…

  5. 2907WB Light-Duty, Over-Travel Slide with Low-Profile and Lever-Disconnect
    DETAILS
    Each
    $87.17

    …enclosures, the 2907WB includes reversible mounting brackets and a slide-to-chassis hole pattern that allows for more options in positioning chassis and mounting configurations. * Supports loads up to 120 lbs. * Tested chassis width at 16” * Designed for 1U-3U chassis * For additional technical information see below With a unique thumb screw fastener, this slide adapts to round, square, or tapped holes on rails and provides tool-less pin mounting of chassis members. Because of its highly…

  6. 9301E Heavy-Duty & Full Extension Drawer Slide (Non-Disconnect)
    DETAILS
    Each
    Rating:
    0%
    $66.79

    …model is the gentle giant of movement solutions--ready to boost heavy pull-out pantries, service vehicles, and even ATMs. * Supports loads up to 600 lbs. * For drawers up to 42” wide with slide lengths up to 60" * 9301E accessory bracket kits offer bottom and side mount installation options * For additional technical information see below Tested for a total of 50,000 cycles at maximum load capacity, the 9301E solution extends unfailing strength and reliability for a full breadth of heavy-duty…

  7. 116RC Heavy-Duty Linear Track System
    DETAILS
    Each
    $40.46

    …doors, and so much more. * Supports loads up to 793 lbs. * Aluminum track in a choice of two lengths: 94.5" and 142" Purchase of the 116RC requires the following components Carriage (Min. Quantity: 1) * SS0116-CASSRC: Carriage – Stainless Steel Balls * CB0116-CASSRC: Carriage – Polymer Balls Track (Min. Quantity: 1) * AL0116-024RC: 94.5" Aluminum Track * AL0116-036RC: 141.7" Aluminum Track NOTE: Purchase of optional Aluminum End Stop (AL0116-STOPRC) requires Recycling Bracket (SS0116-BRKT01RC).

  8. 2807 Light-Duty Low-Profile Slide with Over-Travel for 1U-2U
    DETAILS
    Each
    $78.17

    …a flock of handy features including over-travel, narrow side space, and enhanced friction movement for superior efficiency and performance. * Supports loads up to 100 lbs. * Tested chassis width at 16” * For additional technical information see below This electronic enclosure motion hardware comes with a fixed front bracket and adjustable rear bracket for added versatility and precision, while a premium lock-out feature ensures that chassis remains solidly positioned for regular maintenance.

  9. Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 18” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.

  10. Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 22” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.

  11. Reverse rear-mounting bracket for use with 1029 slide.

  12. Compatible with our 2109 Variable Height Keyboard Slide, this zinc-finished bracket kit allows installers to decide on the most suitable positioning for their hardware, inboard or outboard, while also accommodating suspension adjustment. Each kit includes four mounting brackets as well as bracket mounting screws and slide mounting screws for a convenient and efficient installation process.

VIEW AS:
Grid List

Items 13 - 24 of 37

per page