No Disconnect

  • Products (4)
VIEW AS:
Grid List

Items 1 - 4 of 4

  • 1
per page
  1. 2132 Light-Duty Slide with Lever-Disconnect
    DETAILS
    Each
    $8.74

    …shallow drawers in office desks, bathrooms, and kitchens, this solution keeps supplies and utensils readily available, day-in and day-out. * Supports loads up to 75 lbs. * For drawers up to 16” wide * For additional technical information see below Backed by BHMA & AWI certification, the 2132 also boasts a hold-in detent and patented Cam Drawer Adjust for precise vertical adjustment. No matter the frame or fixture, this shallow drawer solution ensures high-performance for long-term, daily use.

  2. 2109 Light-Duty Slide with Lever-Disconnect for Suspended Mounting
    DETAILS
    Each
    Rating:
    0%
    $18.96

    No need to suspend your disbelief for this motion hardware. Equipped with a lever-disconnect and variable height mounting brackets, the 2109 model is perfect for light-duty cabinetry, keyboard trays, and pencil drawers. * Supports loads up to 75 lbs. * For drawers up to 16” wide * For additional technical information see below Backed by BHMA and AWI certification, this savvy solution provides a cushion of suspension to your hardware, matched with the practicality of a hold-in and hold-out detent…

  3. 3308 Medium-Duty Slide with Latch Disconnect, Lock-In and Lock-Out
    DETAILS
    Each
    Rating:
    0%
    $73.70

    …a lock-in and lock-out feature? No problem. Handling medium-duty loads and keeping hardware solidly positioned when open or closed, the 3308 model ensures safety and easy-access for electronic enclosures, cash drawers, industrial workstations, medical emergency carts, and even vending machines. * Supports loads up to 150 lbs. * Tested drawer width at 16” * For additional technical information see below Equipped with over-travel and our easy-to-use lever disconnect, the 3308 brings simplicity and…

  4. 4180-0603-XE Eclipse Toolkit
    DETAILS
    Each
    $43.91

    …holes for disconnect levers. * 4 + ¾” Drill Extension: Paired with the 3/32” Drill Bit, this extension improves access when pre-drilling disconnect lever holes at the required 10-degree angle. * #2 x 4” Phillips Point Screwdriver Bit: The length on this bit gives installers better access when installing the screws for the disconnect levers. * ¼” Brad Point Drill Bit: This bit is designed for drilling the hook holes in the back of the drawer. If used with the Accuride Drilling Jig, no measuring…

VIEW AS:
Grid List

Items 1 - 4 of 4

  • 1
per page