Pocket

VIEW AS:
Grid List

Items 1 - 12 of 21

  • 1
  • 2
per page
  1. Pocket supports both inset and ¾ full-overlay with an “Auto Open” feature. The Auto Open gently springs doors forward the last 1¼" of travel. This ensures your pocket doors are extended fully before closing. * Supports loads up to 30 lbs. * For pocket doors up to 24" wide x 42" tall * Works with either flipper (horizontal) or pocket (vertical) doors * For additional technical information, see below The 1321 is ideal for home and office cabinets as well as built-in storage casework, this pocket

  2. The Accuride 123 Pocket Door Slide is an easy-to-install movement solution for concealed cabinet doors. This slide uses a novel design for self-alignment, ensuring smooth movement. The Accuride 123 allows a door to retract within a cabinet, preserving a clean esthetic. * Supports loads up to 30 lbs. * For pocket doors up to 42” tall x 24” wide * Features self-aligning movement * Vertically or horizontally mounted * Available in black (CB) finish * Includes 35mm hinges * Backed by a Limited…

  3. Made for tall and heavy pocket doors, the Accuride CB1332 slide provides smooth and silent movement for media centers, armoires, and concealed storage. The CB1332 also includes Accuride’s advanced cable system, which eliminates “racking” often found when opening or closing tall cabinet doors. * For loads up to 75 lbs. * For pocket doors up to 78” tall x 26” wide * Features advanced Anti-Rak stabilizer system * Features self-aligning movement * Vertically or horizontally mounted * Includes…

  4. Made for tall and heavy pocket doors, the Accuride CB1432 slide provides smooth and silent movement for media centers, armoires, and concealed storage. The CB1432 also includes Accuride’s advanced cable system, which eliminates “racking” often found when opening or closing tall cabinet doors. * For loads up to 75 lbs. * For pocket doors up to 78” tall x 26” wide * Features advanced Anti-Rak stabilizer system * Features self-aligning movement * Vertically or horizontally mounted * Includes…

  5. The companion slide to the 9328E model. A member of the newly enhanced and super-strong 9300 series from Accuride, the 9322E is the specially crafted, pocket & bayonet, non-locking motion hardware that delivers guidance to the 9328E’s lock-in and lock-out capabilities. * Supports loads up to 600 lbs. * Tested drawer width up to 32” * For additional technical information see below Providing heavy-duty, full-extension assistance to industrial and vehicle hardware and equipment, this companion…

  6. The Accuride CB1234 Pocket Door Slide is an easy-to-install movement solution for concealed cabinet doors. The slide uses a novel design for self-alignment, ensuring smooth movement. The Accuride CB1234 allows a door to retract within a cabinet, preserving a clean esthetic. * Support loads up to 30 lbs. * For pocket doors up to 42” tall x 24” wide * Features self-aligning movement * Vertically or horizontally mounted * Available in black (CB) finish * Backed by a Limited Lifetime Warranty The…

  7. Enhanced movement and extended access. Designed for pocket & bayonet mounting in metal hardware and fixtures, the 9328E enables tool-less installation that’s labor-saving and cost-effective for equipment drawers or trays in various large vehicles intended for emergency, utility, hazmat, or recreational use. * Supports loads up to 360 lbs. * Tested drawer width up to 32” * For additional technical information see below Fit with an enhanced lock-in and lock-out designed for added reliability, the…

  8. Compatible with models 1332 and 1432, this carrier strip kit is sold separately from D-Pack hardware kits and optimizes pocket and flipper door installation. Each kit includes two black hinge carrier strips, 3 stainless steel connector clips, six #8 x ⅜” black pan head screws (without hinge base plate), six #8 x ⅝” zinc flat head screws (with hinge base plate), and one “Caution” sticker.

  9. Hinge for overlay doors with models 123 and 1234 pocket door slides.

  10. Compatible with our 1332 solution and accommodating pocket doors ¾” to 13/16” thick, this hinge kit provides the extra tools you need for an inset installation. Each order includes two 35mm salice black clip-on hinges, two 3mm mounting base plates, two 3mm hinge base spacers, two hinge arm cover caps, four #6 x ⅝” Phillips flat head screws, and one “Caution” door sticker.

  11. Lending a hand with overlay installation for your pocket and flipper door applications, this optional clip-on hinge kit is compatible with Accuride models 123 and 1234. Each kit includes two zinc 40mm overlay clip-on hinges, 2 base plates, four #6 screws, four #8 screws, and one “Caution” sticker.

  12. Compatible with models 1332 and 1432, this carrier strip kit is sold separately from D-Pack hardware kits and optimizes pocket and flipper door installation. Each kit includes two zinc hinge carrier strips, 3 stainless steel connector clips, six #8 x ⅜” black pan head screws (without hinge base plate), six #8 x ⅝” zinc flat head screws (with hinge base plate), and one “Caution” sticker.

VIEW AS:
Grid List

Items 1 - 12 of 21

  • 1
  • 2
per page