Screws

VIEW AS:
Grid List

Items 1 - 12 of 23

  • 1
  • 2
per page
  1. Compatible with models 1332 and 1432, this carrier strip kit is sold separately from D-Pack hardware kits and optimizes pocket and flipper door installation. Each kit includes two zinc hinge carrier strips, 3 stainless steel connector clips, six #8 x ⅜” black pan head screws (without hinge base plate), six #8 x ⅝” zinc flat head screws (with hinge base plate), and one “Caution” sticker.

  2. …with our 3135EC undermount solution, this kit includes one pair of bottom inset bracket assemblies in a zinc finish, adding ease and precision to alternative frames and mounting styles. For thorough installation, a rear face frame bracket (4180-0656-XE) is also required. Along with both brackets, this single kit also comes with two each #8-32 flat head screws, and an installation guide inside a polybag. Cabinet mounting screws are not included in this kit and must be purchased separately.

  3. 4180-0412-XE Connector Clip Kit
    $4.08

    Need extra connector clips for your pocket and flipper doors? We've got you covered. Working with vertically-mounted models, such as the 1332 and 1432, this kit includes an extra connector clip and installation screws for steadfast durability and convenience. Each kit includes one stainless steel connector clip, two #8 x ⅜” black electroplate pan-head screws (without hinge base plate), two #8 x ⅝” zinc flat head screws (with hinge base plate), as well as one ‘Caution’ sticker.

  4. Compatible with models 1332 and 1432, this carrier strip kit is sold separately from D-Pack hardware kits and optimizes pocket and flipper door installation. Each kit includes two black hinge carrier strips, 3 stainless steel connector clips, six #8 x ⅜” black pan head screws (without hinge base plate), six #8 x ⅝” zinc flat head screws (with hinge base plate), and one “Caution” sticker.

  5. …pattern that allows for more options in positioning chassis and mounting configurations. * Supports loads up to 120 lbs. * Tested chassis width at 16” * Designed for 1U-3U chassis * For additional technical information see below With a unique thumb screw fastener, this slide adapts to round, square, or tapped holes on rails and provides tool-less pin mounting of chassis members. Because of its highly flexible design, the 2907WB remains a one-stop solution for the white box enclosures category.

  6. 4180-0401-XE 2109 Black Finish Bracket Kit
    Rating:
    0%
    $6.66

    Compatible with our 2109 Variable Height Keyboard Slide, this black electroplate finish bracket kit allows installers to decide on the most suitable positioning for their hardware, inboard or outboard, while also accommodating suspension adjustment. Each kit includes four mounting brackets as well as bracket mounting screws and slide mounting screws for a convenient and efficient installation process.

  7. Made to accompany our 3135EC, this bracket kit aids in easy-access installation for rear-facing frames and fixtures in need of concealed hardware. Including two rear brackets with a clear zinc finish, this kit also contains six #8 x ⅝” screws and an installation guide--all inside a polybag. This kit is also RoHS-compliant and available for bulk orders.

  8. Allows users to platform-mount 9300 Series slides. Includes:* Two brackets* Four 1/4" hex-head screws and nuts * Locking washers Compatible with 9301E, 9307E, and 9308E slides,

  9. Compatible with our 2109 Variable Height Keyboard Slide, this zinc-finished bracket kit allows installers to decide on the most suitable positioning for their hardware, inboard or outboard, while also accommodating suspension adjustment. Each kit includes four mounting brackets as well as bracket mounting screws and slide mounting screws for a convenient and efficient installation process.

  10. Return to 116RC Product Detail Page Finishing touches for sliding door hardware. Engineered for the 116RC Door Hardware Kit, these fascia end caps stabilize the anodized aluminum fascia board on its support beam, specifically for use with track systems on sliding doors. Each order comes with two fascia end caps and eight screws for a thorough installation and robust solution.

  11. 4180-0391-XE 123 35mm Base Kit
    $43.73

    Compatible with our 123 Flipper Door Slide, this inset base kit includes black 35mm clip-on hinges as well as #6, #8, and M6 Euro screws--plus pivot blocks and one “Caution” sticker.

  12. Return to 116RC Product Detail Page Ensuring ease from start to finish. Engineered specifically for the 116RC model, these aluminum end stops ensure that your linear track system ends its length of travel safely and soundly--without slamming or rattling shut. Each order comes with two end stops crafted from corrosion-resistant aluminum and two screws for a breezy installation.

VIEW AS:
Grid List

Items 1 - 12 of 23

  • 1
  • 2
per page