Slide Bracket

VIEW AS:
Grid List

Items 1 - 12 of 38

per page
  1. 4180-0758-XE 3832ETR or 3832EHDTR Rear Bracket Kit
    DETAILS
    Each
    $6.94

    Rear bracket for installing 3832 Touch-Release slides into face frame cabinets. Each kit includes: * Compatible with 3832ETR and 3832EHDTR

  2. 116RC Heavy-Duty Linear Track System
    DETAILS
    Each
    $40.46

    A state-of-the-art sliding solution. With ADA-compliant linear motion and design, the 116RC model is an innovative breakthrough for the sliding door market, also accommodating large screens, panels, movable walls, barn doors, and so much more. * Supports loads up to 793 lbs. * Aluminum track in a choice of two lengths: 94.5" and 142" Purchase of the 116RC requires the following components Carriage (Min. Quantity: 1) * SS0116-CASSRC: Carriage – Stainless Steel Balls * CB0116-CASSRC: Carriage –…

  3. 4180-0569-XE 3135EC Bottom Mount Bracket Kit
    DETAILS
    Each
    $12.49

    Bottom mount + top-of-mind. Compatible with the 3135EC Eclipse Undermount solution, this bracket kit supplies the tools and instructions for installing the 3135EC for fixtures and frames that require a bottom mount technique. Including four bottom-mount brackets with a zinc finish, this kit also contains eight #8 32 + ¼" self-tapping screws and an installation guide. One RoHS-compliant kit accommodates one pair of 3135EC slides, with bulk orders also available.

  4. 9300 Bracket Kits Platform Bracket Kits for 9300 Series
    DETAILS
    Each
    $43.26

    Allows users to platform-mount 9300 Series slides. Includes:* Two brackets* Four 1/4" hex-head screws and nuts * Locking washers Compatible with 9301E, 9307E, and 9308E slides,

  5. SS5322 Heavy-Duty Over-Travel and Corrosion-Resistant Slide with Bracket Disconnect
    DETAILS
    Each
    $242.04

    Stainless steel hardware with an easy-going side. Specially engineered with corrosion-resistant stainless steel and easy-install, L-shaped brackets with locator pins for a seamless disconnect, the SS5322 is the ideal solution for fixtures in commercial kitchens and industrial or outdoor cabinetry exposed to the elements. * Supports loads up to 265 lbs. * For drawers up to 18” wide * For additional technical information see below Equipped with a handy hold-in detent that eliminates any chance of…

  6. 5410-0804-CE 22" Clip-On Bracket
    DETAILS
    Each
    $4.34

    Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 22” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.

  7. 5410-0800-CE 14" Clip-On Bracket
    DETAILS
    Each
    $4.34

    Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832 3732, and 3834, this 14” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.

  8. 5410-0801-CE 16" Clip-On Bracket
    DETAILS
    Each
    $4.34

    Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 16” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.

  9. 5410-0802-CE 18" Clip-On Bracket
    DETAILS
    Each
    $4.34

    Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 18” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.

  10. 5410-0803-CE 20" Clip-On Bracket
    DETAILS
    Each
    $4.34

    Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 20” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.

  11. 4010-0157-CE 1029 Rear Mounting Bracket Kit
    DETAILS
    Each
    $1.31

    Adjustable rear mounting bracket for use with 1029 slide.

  12. SS0116-BRKTRC SS0116-BRKTRC 116RC Door Bracket Kit
    DETAILS
    Each
    $170.43

    Return to 116RC Product Detail Page Extra smooth movement and proven endurance. Specially engineered for the 116RC Sliding Door Hardware Kit, this door bracket kit helps protect your linear track system’s carriages when a damper (CB0116-DAMP) is installed to cushion a fixture’s end of travel.

VIEW AS:
Grid List

Items 1 - 12 of 38

per page