Slide Track

VIEW AS:
Grid List

Items 1 - 10 of 10

  • 1
per page
  1. 116RC Heavy-Duty Linear Track System
    DETAILS
    $40.46

    …for the sliding door market, also accommodating large screens, panels, movable walls, barn doors, and so much more. * Supports loads up to 793 lbs. * Aluminum track in a choice of two lengths: 94.5" and 142" Purchase of the 116RC requires the following components Carriage (Min. Quantity: 1) * SS0116-CASSRC: Carriage – Stainless Steel Balls * CB0116-CASSRC: Carriage – Polymer Balls Track (Min. Quantity: 1) * AL0116-024RC: 94.5" Aluminum Track * AL0116-036RC: 141.7" Aluminum Track NOTE: Purchase…

  2. AL4190 Medium-Duty Slide with Tilt-Track System
    DETAILS

    …equipment storage on vehicles, in warehouses, and inside garages. * Supports loads up to 140 lbs. * For drawers up to 40” wide * Aluminum track in lengths of 24" and 40" * For additional technical information see below * Kit contains: 2 Aluminum Tracks, track cover caps, roller wheel assemblies, track rollers and 4 bumper and end stops.  Made with aluminum tracks that can be cut to a custom length, the AL4190 guarantees corrosion-resistance — all the better for mobile or industrial use. This…

  3. 115RC Medium-Duty LInear Track System
    DETAILS
    Rating:
    100%
    $4.99

    …walls, sliding racks, screens, panels, partitions, and even assembly lines. * Supports loads up to 265 lbs. * Aluminum tracks available in two lengths: 47" and 94,” with or without pre-drilled holes Purchase of the 115RC requires the following components: Carriage (Min. Quantity: 1) * SS0115-CASSRC: Carriage – Stainless Steel Balls * CB0115-CASSRC: Carriage – Polymer Balls Track (Min. Quantity: 1) * AL0115-0120RCH: 47" Aluminum Track w/ Pre-Drilled holes * AL0115-0240RCH: 94" Aluminum Track w/…

  4. FG115 Light-Duty Linear Friction Guide System
    DETAILS
    $29.99

    …FG115 uses a self-lubricating carriage and rail to bring motion to your designs—rather than ball bearings in traditional slides and linear track systems. With multiple adjust options (Auto, Non, and Manual) as well as corrosion-resistant aluminum, this friction guide can handle any task and endure the harshest environments. * Supports loads up to 4,000N (900 lbf.) * Aluminum track available in two lengths: 1 meter or 2 meters. * For additional technical information see below Like the 115RC, the…

  5. CB0116-DAMP 116RC Damper
    DETAILS
    $140.31

    …with a soft side. An optional component for our 116RC Heavy-Duty Linear Track System, this damper cushions and decelerates the last 1.6” of your hardware’s travel for reduced vibration and migration while also providing a smooth, gentle return every time. With the use of this optional damper, end stops are no longer required. However, recycling brackets (SS0166-BRKT01RC) will be needed to protect the carriages, and sliding door fixtures will require a separate bracket kit. Your hardware deserves…

  6. Return to 116RC Product Detail Page Finishing touches for sliding door hardware. Engineered for the 116RC Door Hardware Kit, these fascia end caps stabilize the anodized aluminum fascia board on its support beam, specifically for use with track systems on sliding doors. Each order comes with two fascia end caps and eight screws for a thorough installation and robust solution.

  7. Return to 116RC Product Detail Page The sum of its parts. A component within the Sliding Door Hardware Kit for the 116RC Heavy-Duty Linear Track System, this 142” fascia is crafted from anodized aluminum and clips onto its support beam (AL0116-SUPPRC) for a sleek, completed design. For extra easy-access, an installer can lift and hook the fascia open to reach the track and fittings responsible for linear motion.

  8. Return to 116RC Product Detail Page Structural support for load-bearing walls. A component within the Sliding Door Hardware Kit for the 116RC Heavy-Duty Linear Track System, this support beam anchors your motion hardware securely for tried and true performance that endures the test of time.

  9. Available as an optional accessory to aid in the 115RC installation process, this drilling jig is made-to-order and intended for locating holes and pinning multiple lengths of track together.

  10. Return to 116RC Product Detail Page Extra smooth movement and proven endurance. Specially engineered for the 116RC Sliding Door Hardware Kit, this door bracket kit helps protect your linear track system’s carriages when a damper (CB0116-DAMP) is installed to cushion a fixture’s end of travel.

VIEW AS:
Grid List

Items 1 - 10 of 10

  • 1
per page