Slide With Bracket

  • Products (34)
VIEW AS:
Grid List

Items 1 - 12 of 34

per page
  1. Recently enhanced with increased load capacity and shock-absorbing ball bearing space bumpers that reduce impact noise, the 9301E model is the gentle giant of movement solutions--ready to boost heavy pull-out pantries, service vehicles, and even ATMs. * Supports loads up to 600 lbs. * For drawers up to 42” wide with slide lengths up to 60" * 9301E accessory bracket kits offer bottom and side mount installation options * For additional technical information see below Tested for a total of 50,000…

  2. …is fit with improved lock-in/lock-out springs, ensuring your items and equipment stay safely stowed away while remaining easier to access than ever. * Supports loads up to 600 lbs. * Optional platform bracket kit allows for bottom and side mount applications * For additional technical information see below From heavy-duty fixtures and appliances around the home to drawers and trays for gear on utility and emergency vehicles, luxury RVs, or overland trucks and trailers, our 9308E slide endures…

  3. …for easy, extended access to stored items, the 305A-LR model is superior motion hardware for just about any industrial fixture--even photographic equipment. * Supports loads up to 140 lbs. * Tested drawer width at 16” * For additional technical information see below With an optional electronic enclosure bracket kit available for EIA rack-mount chassis, the 305A-LR allows for recessed mounting behind cabinet rails, reducing side-space requirements to 0.39” for added convenience and efficiency.

  4. Stainless steel hardware with an easy-going side. Specially engineered with corrosion-resistant stainless steel and easy-install, L-shaped brackets with locator pins for a seamless disconnect, the SS5322 is the ideal solution for fixtures in commercial kitchens and industrial or outdoor cabinetry exposed to the elements. * Supports loads up to 265 lbs. * For drawers up to 18” wide * For additional technical information see below Equipped with a handy hold-in detent that eliminates any chance of…

  5. 5410-0804-CE 22" Clip-On Bracket
    $4.34

    Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 22” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.

  6. 5410-0800-CE 14" Clip-On Bracket
    $4.34

    Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832 3732, and 3834, this 14” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.

  7. 5410-0801-CE 16" Clip-On Bracket
    Rating:
    0%
    $4.34

    Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 16” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.

  8. 5410-0802-CE 18" Clip-On Bracket
    $4.34

    Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 18” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.

  9. 5410-0803-CE 20" Clip-On Bracket
    $4.34

    Compatible with models 3832E, 3832EDO, 3832ESC, 3832EHDSC, CH3832, 3732, 3834, 2109, and 2132, this 20” Clip-On Bracket enables bottom or platform mounting for side-mount ball bearing slides while supplying a simple, tooless installation. Note: brackets are sold singly, and two are required per a pair of slides.

  10. Adjustable rear mounting bracket for use with 1029 slide.

  11. Compatible with our 2109 Variable Height Keyboard Slide, this zinc-finished bracket kit allows installers to decide on the most suitable positioning for their hardware, inboard or outboard, while also accommodating suspension adjustment. Each kit includes four mounting brackets as well as bracket mounting screws and slide mounting screws for a convenient and efficient installation process.

  12. 4180-0401-XE 2109 Black Finish Bracket Kit
    Rating:
    0%
    $5.31

    Compatible with our 2109 Variable Height Keyboard Slide, this black electroplate finish bracket kit allows installers to decide on the most suitable positioning for their hardware, inboard or outboard, while also accommodating suspension adjustment. Each kit includes four mounting brackets as well as bracket mounting screws and slide mounting screws for a convenient and efficient installation process.

VIEW AS:
Grid List

Items 1 - 12 of 34

per page