- Products (13)
Items 1 - 12 of 13
- SS0330 Medium-Duty Full-Extension and Corrosion-Resistant Slide$170.59
Stainless steel with safety to boot. With a wider cross-section than the SS2028, the SS0330 model still offers the same security and endurance fit with stainless steel ball bearings and lubricated with food-safe grease for cabinetry in a wide range of spaces--industrial, outdoor, commercial, and residential. * Supports loads up to 143 lbs. * Tested drawer width at 18” * For additional technical information see below A non-disconnect solution for added safety and assurance, the SS0330 also boasts…
Stainless steel hardware with an easy-going side. Specially engineered with corrosion-resistant stainless steel and easy-install, L-shaped brackets with locator pins for a seamless disconnect, the SS5322 is the ideal solution for fixtures in commercial kitchens and industrial or outdoor cabinetry exposed to the elements. * Supports loads up to 265 lbs. * For drawers up to 18” wide * For additional technical information see below Equipped with a handy hold-in detent that eliminates any chance of…
Stainless steel hardware with a narrow profile. With a corrosion-resistant coating, the SS2028 model is perfect for fixtures that need to withstand moisture or high levels of humidity--including but not limited to industrial machines, outdoor hardware, and commercial or residential kitchens. * Supports loads up to 100 lbs. * For drawers up to 18” wide * For additional technical information see below Non-disconnect for added safety, the SS2028 also includes a standard ¾-extension and a hold-in…
- SS5321 Heavy-Duty Over-Travel and Corrosion-Resistant Slide$221.71
Stainless steel + super-strength. Complete with corrosion-resistance and a heavy-duty load rating, the SS5321 is go-to motion hardware for outdoor fixtures, watercraft, as well as marine and industrial storage. * Supports loads up to 352 lbs. * Tested drawer width at 18” * For additional technical information see below With the added convenience of over-travel for full-access to stored items, the SS5321 also includes a hold-in detent to prevent drawer roll-out and bounce-back, providing reliable…
Return to FG115 Product Detail Page Supplying flawless friction guidance to your industrial hardware. Crafted from advanced technical polymer, this auto-adjust carriage attaches to FG115 aluminum rails, offering constant preload force that will endure these conditions (and harsh environments) throughout the lifespan of its intended application. With the use of included plastic pins, tension between the rail and carriage remains preset. Furthermore, the carriage's internal springs create constant…
Return to FG115 Product Detail Page Precision + Preload = Perfect Friction Movement. Adhering to the ISO Standard 12090 size, this manual adjust carriage is designed from lightweight advanced technical polymer that ensures smooth and seamless motion for automation, industrial machines, and assembly lines. With the use of an allen wrench (not included), the friction between this component and aluminum rail (sold separately) can be fine tuned to the specific preload or clearance your hardware…
Return to FG115 Product Detail Page True blue linear motion and friction. Boasting a low-maintenance and cost-effective design with advanced technical polymer, this non-adjust carriage supplies quiet, seamless movement to machinery and other industrial fixtures in need of unerring, repetitive performance. Because the tension between this carriage and an FG115 aluminum rail can't be adjusted, this free floating component is actually ideal for correcting any potential misalignments within a…
- SS0116-CASSRC SS0116-CASSRC 116RC Cassette with Stainless Steel Bearings$192.48
Return to 116RC Product Detail Report Available as a single component or within a kit for our 116RC Linear Track System, this cassette model is crafted with stainless steel ball bearings for added strength, providing unerring endurance to your design’s overall function. Easy-to-install and available for flat- or side-mounting, this stainless steel ball bearing carriage adds heavy-duty seamless, smooth motion to your aluminum track hardware.
- CB0116-CASSRC CB0116-CASSRC 116RC Cassette with Polymer Bearings$192.48
Return to 116RC Product Detail Page Extra Quiet + Renowned Quality. Sold as a single, extra component or within the 116RC kit, this cassette provides flawless, linear motion to aluminum track systems with the use of polymer bearings that guarantee silenced operation. Easy-to-install and available for flat- or side-mounting, this polymer ball bearing carriage adds smooth and reliable motion to your hardware of choice.
- CB0115-CASSRC CB0115-CASSRC 115RC Cassette with Polymer Bearings$45.00
Return to 115RC Product Detail Page Extra Quiet + The Same High Quality. Sold as a single component or within a 115RC kit (4180-0756-XE), this cassette provides flawless, linear motion to aluminum track systems with the use of polymer bearings that guarantee silenced operation. Easy-to-install and available for flat- or side-mounting, this polymer ball bearing carriage adds effortless and reliable motion to your hardware of choice.
Return to 116RC Product Detail Page Extra smooth movement and proven endurance. Specially engineered for the 116RC Sliding Door Hardware Kit, this door bracket kit helps protect your linear track system’s carriages when a damper (CB0116-DAMP) is installed to cushion a fixture’s end of travel.
Return to 116RC Product Detail Page Extra protection + Quality assurance. Engineered specifically for the 116RC model, this recycling bracket protects the carriages on your linear track system when a damper (CB0116-DAMP) is installed to cushion a fixture's end of travel. One recycling bracket is needed for each recirculating ball carriage.
Items 1 - 12 of 13