Ss Slides

  • Products (5)
VIEW AS:
Grid List

Items 1 - 5 of 5

  • 1
per page
  1. Stainless steel + super-strength. Complete with corrosion-resistance and a heavy-duty load rating, the SS5321 is go-to motion hardware for outdoor fixtures, watercraft, as well as marine and industrial storage. * Supports loads up to 352 lbs. * Tested drawer width at 18” * For additional technical information see below With the added convenience of over-travel for full-access to stored items, the SS5321 also includes a hold-in detent to prevent drawer roll-out and bounce-back, providing reliable…

  2. Stainless steel with safety to boot. With a wider cross-section than the SS2028, the SS0330 model still offers the same security and endurance fit with stainless steel ball bearings and lubricated with food-safe grease for cabinetry in a wide range of spaces--industrial, outdoor, commercial, and residential. * Supports loads up to 143 lbs. * Tested drawer width at 18” * For additional technical information see below A non-disconnect solution for added safety and assurance, the SS0330 also boasts…

  3. Stainless steel hardware with a narrow profile. With a corrosion-resistant coating, the SS2028 model is perfect for fixtures that need to withstand moisture or high levels of humidity--including but not limited to industrial machines, outdoor hardware, and commercial or residential kitchens. * Supports loads up to 100 lbs. * For drawers up to 18” wide * For additional technical information see below Non-disconnect for added safety, the SS2028 also includes a standard ¾-extension and a hold-in…

  4. Stainless steel hardware with an easy-going side. Specially engineered with corrosion-resistant stainless steel and easy-install, L-shaped brackets with locator pins for a seamless disconnect, the SS5322 is the ideal solution for fixtures in commercial kitchens and industrial or outdoor cabinetry exposed to the elements. * Supports loads up to 265 lbs. * For drawers up to 18” wide * For additional technical information see below Equipped with a handy hold-in detent that eliminates any chance of…

  5. Return to 116RC Product Detail Page Extra smooth movement and proven endurance. Specially engineered for the 116RC Sliding Door Hardware Kit, this door bracket kit helps protect your linear track system’s carriages when a damper (CB0116-DAMP) is installed to cushion a fixture’s end of travel.

VIEW AS:
Grid List

Items 1 - 5 of 5

  • 1
per page