Stainless

VIEW AS:
Grid List

Items 1 - 12 of 21

  • 1
  • 2
per page
  1. The ST8200 is a bold new option in heavy-duty roller-bearing slides. This premium movement solution features a low-maintenance design built to handle the rigors of frequent use. The ST8200 provides you with hassle-free installation (welding not necessary) and added conveniences, including self-close and auto lock-in features. * Side-mount configuration * Easy to install * Stainless-steel construction * Full-extension design (over-travel upon request) * Max Load rating - Up to 275 lb * Available…

  2. The ST8201 is a bold new option in heavy-duty roller-bearing slides. This premium movement solution features a low-maintenance design built to handle the rigors of frequent use. The ST8201 provides you with hassle-free installation (welding not necessary) and added conveniences, including self-close and auto lock-in features. Choose between standard and extended flanges determined by your pan or drawer configuration. * Bottom-mount configuration * Easy to install * Stainless-steel construction *…

  3. The Accuride AL4165 is an industrial-grade and heavy-duty slide with two-way full travel. The AL4165 uses corrosion-resistant aluminum slide members and stainless-steel bearings, ensuring excellent long-term performance even in tough environments. * Supports loads up to 596 lbs. * Side-mount configuration * Two-way Travel * Corrosion-resistant materials * Full-extension design The AL4165 offers full-extension travel in both directions, while occupying only 1.04 inches of side-space. This slide…

  4. Stainless steel with safety to boot. With a wider cross-section than the SS2028, the SS0330 model still offers the same security and endurance fit with stainless steel ball bearings and lubricated with food-safe grease for cabinetry in a wide range of spaces--industrial, outdoor, commercial, and residential. * Supports loads up to 143 lbs. * Tested drawer width at 18” * For additional technical information see below A non-disconnect solution for added safety and assurance, the SS0330 also boasts…

  5. Stainless steel + super-strength. Complete with corrosion-resistance and a heavy-duty load rating, the SS5321 is go-to motion hardware for outdoor fixtures, watercraft, as well as marine and industrial storage. * Supports loads up to 352 lbs. * Tested drawer width at 18” * For additional technical information see below With the added convenience of over-travel for full-access to stored items, the SS5321 also includes a hold-in detent to prevent drawer roll-out and bounce-back, providing reliable…

  6. Stainless steel hardware with a narrow profile. With a corrosion-resistant coating, the SS2028 model is perfect for fixtures that need to withstand moisture or high levels of humidity--including but not limited to industrial machines, outdoor hardware, and commercial or residential kitchens. * Supports loads up to 100 lbs. * For drawers up to 18” wide * For additional technical information see below Non-disconnect for added safety, the SS2028 also includes a standard ¾-extension and a hold-in…

  7. Stainless steel hardware with an easy-going side. Specially engineered with corrosion-resistant stainless steel and easy-install, L-shaped brackets with locator pins for a seamless disconnect, the SS5322 is the ideal solution for fixtures in commercial kitchens and industrial or outdoor cabinetry exposed to the elements. * Supports loads up to 265 lbs. * For drawers up to 18” wide * For additional technical information see below Equipped with a handy hold-in detent that eliminates any chance of…

  8. Designed to withstand moderate weather conditions. With a special, weather-resistant coating that provides eight times more protection than a standard zinc finish, the CH3832E model is perfect for fixtures and hardware that receive exposure to the elements--such as greenhouses, locker rooms, garages, grill stations, and more! * Supports loads up to 100 lbs. * For drawers up to 24” wide * For additional technical information see below Comprised of a stainless-steel ball retainer, ball bearings,…

  9. Return to 116RC Product Detail Report Available as a single component or within a kit for our 116RC Linear Track System, this cassette model is crafted with stainless steel ball bearings for added strength, providing unerring endurance to your design’s overall function. Easy-to-install and available for flat- or side-mounting, this stainless steel ball bearing carriage adds heavy-duty seamless, smooth motion to your aluminum track hardware.

  10. Everything you need for effortless linear motion. A complete kit for an easy yet thorough set-up, this 115RC kit includes the following: two stainless steel ball carriages (SS0115-CASSRC), 2 end stops (AL0115-STOPRC), four M5 ⅝” barrel nuts, and four star washers.

  11. Lightweight aluminum + stainless steel ball bearings = super-strength. Resistant to moisture, humidity, and corrosion, our AL4120 model can tackle any heavy-duty task while enduring harsh, outdoor, or moist environments. * Supports loads up to 1,212 lbs. * Tested drawer width at 24” * For additional technical information see below From woodworking projects to equipment storage and industrial use, this robust solution offers the same smooth, high-performance without adding extra weight to your…

  12. Compatible with models 1332 and 1432, this carrier strip kit is sold separately from D-Pack hardware kits and optimizes pocket and flipper door installation. Each kit includes two black hinge carrier strips, 3 stainless steel connector clips, six #8 x ⅜” black pan head screws (without hinge base plate), six #8 x ⅝” zinc flat head screws (with hinge base plate), and one “Caution” sticker.

VIEW AS:
Grid List

Items 1 - 12 of 21

  • 1
  • 2
per page