Items 1 - 12 of 12
Return to 115RC Product Detail Page Ensuring ease from start to finish. Sold separately or within either 115RC kit (4180-0756-XE/4180-0746-XE), these aluminum end stops ensure that your linear track system ends its length of travel safely and soundly--without slamming or rattling shut. Each order comes with one end stop crafted from corrosion-resistant aluminum and two screws for a breezy installation.
Return to 116RC Product Detail Page Ensuring ease from start to finish. Engineered specifically for the 116RC model, these aluminum end stops ensure that your linear track system ends its length of travel safely and soundly--without slamming or rattling shut. Each order comes with two end stops crafted from corrosion-resistant aluminum and two screws for a breezy installation.
…for our 116RC Heavy-Duty Linear Track System, this damper cushions and decelerates the last 1.6” of your hardware’s travel for reduced vibration and migration while also providing a smooth, gentle return every time. With the use of this optional damper, end stops are no longer required. However, recycling brackets (SS0166-BRKT01RC) will be needed to protect the carriages, and sliding door fixtures will require a separate bracket kit. Your hardware deserves every bit of convenience and ease.
…doors, and so much more. * Supports loads up to 793 lbs. * Aluminum track in a choice of two lengths: 94.5" and 142" Purchase of the 116RC requires the following components Carriage (Min. Quantity: 1) * SS0116-CASSRC: Carriage – Stainless Steel Balls * CB0116-CASSRC: Carriage – Polymer Balls Track (Min. Quantity: 1) * AL0116-024RC: 94.5" Aluminum Track * AL0116-036RC: 141.7" Aluminum Track NOTE: Purchase of optional Aluminum End Stop (AL0116-STOPRC) requires Recycling Bracket (SS0116-BRKT01RC).
…better access when installing the screws for the disconnect levers. * ¼” Brad Point Drill Bit: This bit is designed for drilling the hook holes in the back of the drawer. If used with the Accuride Drilling Jig, no measuring is required. * ¼” Stop Collar: Used with the ¼” Brad Point Drill Bit, this sets the depth for the drawer-hook holes and prevents over-drilling. * 5/64” HSS Spring-Loaded Self-Centering Drill Bit: This component fits the wood screw holes of the Eclipse products and ensures…
…up to 140 lbs. * For drawers up to 40” wide * Aluminum track in lengths of 24" and 40" * For additional technical information see below * Kit contains: 2 Aluminum Tracks, track cover caps, roller wheel assemblies, track rollers and 4 bumper and end stops. Made with aluminum tracks that can be cut to a custom length, the AL4190 guarantees corrosion-resistance — all the better for mobile or industrial use. This specialty solution is crafted to be fully adjustable with an optional lock-in feature.
Bringing maximum versatility and utility to electronic enclosures, the 2907WB includes reversible mounting brackets and a slide-to-chassis hole pattern that allows for more options in positioning chassis and mounting configurations. * Supports loads up to 120 lbs. * Tested chassis width at 16” * Designed for 1U-3U chassis * For additional technical information see below With a unique thumb screw fastener, this slide adapts to round, square, or tapped holes on rails and provides tool-less pin…
Everything you need for effortless linear motion. A complete kit for an easy yet thorough set-up, this 115RC kit includes the following: two polymer ball carriages (CB0115-CASSRC), 2 end stops (AL0115-STOPRC), four M5 ⅝” barrel nuts, and four star washers.
Everything you need for effortless linear motion. A complete kit for an easy yet thorough set-up, this 115RC kit includes the following: two stainless steel ball carriages (SS0115-CASSRC), 2 end stops (AL0115-STOPRC), four M5 ⅝” barrel nuts, and four star washers.
…lifting to keep your stored items safe and easy-to-access. * Supports loads up to 600 lbs. * Non-disconnect * For additional technical information see below Equipped with a front latch release that secures drawers and trays in an open position for extended access, the 9307E is motion hardware that remains on-the-go and ready-to-use. An enhanced lock-out spring and lever adds reliability while added shock absorbing ball spacer bumpers reduce end stop and lower impact noise for extra convenience.
Industrial performance with a positive end stop. A non-disconnect solution for added security in high-production and highly technical environments, the 3301 model also includes your choice of a hold-in detent to prevent drawer roll-out and bounce-back, as well as an additional kit for electronic enclosure chassis mounting. * Supports loads up to 150 lbs. * Tested drawer width at 16” * For additional technical information see below Built for over-travel, the 3301 supplies extended, easy-access to…
Extends beyond your expectations. Engineered with our signature over-travel feature for thorough access to stored items, the 3357 lends a medium-duty hand to storage drawers and trays in industrial workstations and machinery, medical equipment, electronic enclosures, and more. * Supports loads up to 150 lbs. * Includes stop-out * For additional technical information see below Unlike the 3307, the 3357 includes a stop-out. However, this motion hardware’s stop-out does not include a lock-out that…
Items 1 - 12 of 12