Track System

VIEW AS:
Grid List

Items 1 - 12 of 17

  • 1
  • 2
per page
  1. Seamless movement paired with infinite possibilities. The endlessly versatile 115RC Linear Track System contains lightweight, corrosion-resistant tracks that can be side, flat, or vertically mounted—offering reliable guidance to movable walls, sliding racks, screens, panels, partitions, and even assembly lines. * Supports loads up to 265 lbs. * Aluminum tracks available in two lengths: 47" and 94,” with or without pre-drilled holes Purchase of the 115RC requires the following components:…

  2. …movable walls, barn doors, and so much more. * Supports loads up to 793 lbs. * Aluminum track in a choice of two lengths: 94.5" and 142" Purchase of the 116RC requires the following components Carriage (Min. Quantity: 1) * SS0116-CASSRC: Carriage – Stainless Steel Balls * CB0116-CASSRC: Carriage – Polymer Balls Track (Min. Quantity: 1) * AL0116-024RC: 94.5" Aluminum Track * AL0116-036RC: 141.7" Aluminum Track NOTE: Purchase of optional Aluminum End Stop (AL0116-STOPRC) requires Recycling Bracket…

  3. …developed tilt track system that specializes in (but is not limited to) over-the-shoulder storage, the AL4190 solution guarantees full-viewing and easy-access to stowed-away items in a variety of settings, including supply and equipment storage on vehicles, in warehouses, and inside garages. * Supports loads up to 140 lbs. * For drawers up to 40” wide * Aluminum track in lengths of 24" and 40" * For additional technical information see below * Kit contains: 2 Aluminum Tracks, track cover caps,…

  4. …self-lubricating carriage and rail to bring motion to your designs—rather than ball bearings in traditional slides and linear track systems. With multiple adjust options (Auto, Non, and Manual) as well as corrosion-resistant aluminum, this friction guide can handle any task and endure the harshest environments. * Supports loads up to 4,000N (900 lbf.) * Aluminum track available in two lengths: 1 meter or 2 meters. * For additional technical information see below Like the 115RC, the FG115’s…

  5. Return to 116RC Product Detail Page Ensuring ease from start to finish. Engineered specifically for the 116RC model, these aluminum end stops ensure that your linear track system ends its length of travel safely and soundly--without slamming or rattling shut. Each order comes with two end stops crafted from corrosion-resistant aluminum and two screws for a breezy installation.

  6. Return to 116RC Product Detail Page Extra smooth movement and proven endurance. Specially engineered for the 116RC Sliding Door Hardware Kit, this door bracket kit helps protect your linear track system’s carriages when a damper (CB0116-DAMP) is installed to cushion a fixture’s end of travel.

  7. Return to 115RC Product Detail Page Ensuring ease from start to finish. Sold separately or within either 115RC kit (4180-0756-XE/4180-0746-XE), these aluminum end stops ensure that your linear track system ends its length of travel safely and soundly--without slamming or rattling shut. Each order comes with one end stop crafted from corrosion-resistant aluminum and two screws for a breezy installation.

  8. Return to 116RC Product Detail Page Extra protection + Quality assurance. Engineered specifically for the 116RC model, this recycling bracket protects the carriages on your linear track system when a damper (CB0116-DAMP) is installed to cushion a fixture's end of travel. One recycling bracket is needed for each recirculating ball carriage.

  9. Return to 116RC Product Detail Page Extra Quiet + Renowned Quality. Sold as a single, extra component or within the 116RC kit, this cassette provides flawless, linear motion to aluminum track systems with the use of polymer bearings that guarantee silenced operation. Easy-to-install and available for flat- or side-mounting, this polymer ball bearing carriage adds smooth and reliable motion to your hardware of choice.

  10. Return to 116RC Product Detail Page Finishing touches for sliding door hardware. Engineered for the 116RC Door Hardware Kit, these fascia end caps stabilize the anodized aluminum fascia board on its support beam, specifically for use with track systems on sliding doors. Each order comes with two fascia end caps and eight screws for a thorough installation and robust solution.

  11. Return to 116RC Product Detail Page Structural support for load-bearing walls. A component within the Sliding Door Hardware Kit for the 116RC Heavy-Duty Linear Track System, this support beam anchors your motion hardware securely for tried and true performance that endures the test of time.

  12. Renowned hardware + The tools you need. Available as an optional accessory for the 115RC Linear Track System, these nuts and washers aid in the installation of any additional carriages your hardware needs. Each order includes two M5 ⅝” barrel nuts and two star washers.

VIEW AS:
Grid List

Items 1 - 12 of 17

  • 1
  • 2
per page